I replaced the OEM brake pads, front and rear, with EBCs yesterday. I cleaned the rotors, pistons, and calipers really well. Took her for a ride and bedded in the new pads.
These pads are a bit nosier than the stockers but they stop the bike VERY nicely.
I had a bit of pulsation from the front brakes before the change and that's now gone. The rear pads were wore down to the wear indicators but the fronts were not, except for the outboard left side pads. These pads were WAY past the wear indicators and almost down to the metal of the backing plate. What's up with that? Everything seems to be moving and working ok so I don't understand the uneven wear.