Converting C14 stock power outlet to Powerlet?

[jaclaw]

Has anyone converted the stock C14 power outlet to a Powerlet?  I installed a 2nd stock outlet hoping to cure the problem of a loose connection.  No success.  Tired of stuffing toothpicks and still losing power to my GPS.  Just want to know if it is a direct replacement or if modification required.  Thanks,  Jim

[lt1]

I used one of these Powerlet adapters:
http://www.powerlet.com/product/cigarette-insert-to-powerlet-socket-metal-adapter-neopreen-cap/1

I had to solder a small nut on the end to make a reliable connection.  I was going to post a pic, but seem to have misplaced the adapter.

[bigdaddyjob]

I have seen these in my Ebay paroosing, but I dont know how well they work, they have both an all-time fused, and an ignition activated setup. Might be worth a try, then you could report back to us

http://www.ebay.com/itm/Kawasaki-Concours-14-Dashboard-Power-Outlet-ALWAYS-ON-/160788347866?pt=Motorcycles_Parts_Accessories&hash=item256fbb7bda&vxp=mtr

[jaclaw]

I already pulled the trigger on the Powerlet socket before the posting on the one from ebay, looks like I'll report back on that instead.  Thanks for both suggestions.  Jim

[556ALPHA]

I have seen these in my Ebay paroosing, but I dont know how well they work, they have both an all-time fused, and an ignition activated setup. Might be worth a try, then you could report back to us

http://www.ebay.com/itm/Kawasaki-Concours-14-Dashboard-Power-Outlet-ALWAYS-ON-/160788347866?pt=Motorcycles_Parts_Accessories&hash=item256fbb7bda&vxp=mtr

OUCH, 70 bucks.  Seems it would be cheaper direct from Powerlet.

http://www.powerlet.com/product/low-profile-powerlet-socket-kit-36/166

[mikeboileau]

OUCH, 70 bucks.  Seems it would be cheaper direct from Powerlet.

http://www.powerlet.com/product/low-profile-powerlet-socket-kit-36/166

Yeah, but he is proud of his instructions......

 

[jaclaw]

The PowerLet sockets fit fine in the space behind the left hand panel.  They are a little smaller in diameter and length and the installation would have been easier if I had not already installed a stock outlet.  Because the hole cut for the stock outlet was larger than the PowerLet  I had to use a fender washer  on either side of the plastic panel, but it turned out fine.   

[McJunkie]

I installed one on the left side as well. Ordered mine directly from Powerlet. Don't remember the price but it was way less than $70.

[stevewfl]

I may buy one after my upcoming maine/ canada ride.

Wow powerlet is proud of these, on their web page they show  butchered ZX14 subframe plastics 

[OregonLAN]

I added mine to the left side. I wanted something I could keep the battery charged with and plug in my heated gear in the spring, fall and summer ridding months.