Here you go Max. I did these real quick this morn for you. The plywood that I used wasn't a full sheet and it didn't quite reach both tires the way I wanted and it's a bit bowed. Plus the lighting wasn't great either and I used my cell camera. I'll pull out a full sheet over the weekend and get some better lit pics.
After all the disclaimers above...
From what I can tell, the lower black plastic could take a slight hit in a drop but the colored bits, bags, and mirror look to be safe.
Thanks so much for the effort. It looks like the plywood doesn't even touch the GSG in either the first or third photo
I agree that the front-lower (black) fairing is going to hit pretty hard and deform before touching the GSG, and once touching, the front-upper fairings, mirrors, and probably the shifters/pedals are safe. The McE rears look to be a nice, solid touch-point. I can't tell from the pics, but I suspect they will not only protect the bags, but the exhaust and swing arms too.
Tough decisions about the GSG. I see their value in helping to protect the bike, but so far, they don't seem to live up to expectations....
If you want to post more pics (higher res, more light/flash, more angles, larger sheet), I am certainly very interested (as are probably some other people). I would encourage uploading to the forum instead of linking, so they are permanent, and probably posting or cross-posting in one of the GSG threads for future posterity.