Now I wonder what the "smart" and "answer back" fuses are really for? Probably a secret circuit for Big Brother to tap into like our cell phones.Have you been peeking into the arena?
I'll guess it controls the VVT on our bikes- looks like Kawasaki didn't convert that fuse holder nomenclature from Japanese to English very accurately.
Ok mystery solved.pic?
I found the O2 sensor on my bike.
I found the O2 wire on the fuse box and started pulling on it.
If you keep tugging on it, it will work lose. At the end was the O2 sensor. It's apparently just taped up inside the harness not being used.
If you keep tugging on it, it will work lose. At the end was the O2 sensor. It's apparently just taped up inside the harness not being used.
All the wiring seems to be there for an O2 sensor/closed loop system. I wonder if a sensor could be installed and if Guhl could activate the ECU to use it.
IIRC ..... Guhl already has maps and has done reflashes for some of the over sea C14s which have O2 sensors. So anyone who's seriously consittering adding an O2 sensor should contact Guhl and verify this for us.