« previous next »
  Go Down

Author Topic: Flush Mount Signals....smoke  (Read 5031 times)

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Flush Mount Signals....smoke
« on: February 04, 2012, 12:10:11 PM »
I thought you guys might like to see these.  I searched and was nto able to find any pics of thsi mod.  These are the ebay  "flush mount euro" signals that sell for @ 50.00.

Installation is perfect for a Utah winter. This means you ca do it at 20 degrees without freezing to death.  The assembly is very well made and accepts the stock blub and socket assy.  The lens is furnished with a bulb and socket, btu ti did not match my oem wiring so I'll save the bulbs for a spare.  Overall, I'm happy with how it turned out.  Visibility is as good as it was, so I'm not sure why these were not on the bikes when we bought them.  They do carry the European certification label, but not DOT markings. The fit is great, so I dont expect issues at registration time.
Logged

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: Flush Mount Signals....smoke
« Reply #1 on: February 04, 2012, 12:11:19 PM »
Heres the other photo:
Logged

Offline Jeremy Mitchell

  • Sr. Member
  • ****
  • Posts: 1756
  • Country: 00
  • COG#9899
Re: Flush Mount Signals....smoke
« Reply #2 on: February 04, 2012, 12:43:31 PM »
Looks good.  Your bike is spotless, I'm sure my bike wouldn't even be allowed in your garage.   ;D
Logged
Keeping the economy going, one tank of fuel and two tires at a time.

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #3 on: February 04, 2012, 02:28:12 PM »
Looks great RC, much better IMO!  8)
 
 
I did this same mod, I also did the rear ones too, here's the link to my thread with before and after shots, etc...
 
http://www.zggtr.org/index.php?topic=952.msg9556#msg9556
Logged

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: Flush Mount Signals....smoke
« Reply #4 on: February 04, 2012, 02:51:41 PM »
ZG, the rear signals look great. I think I'll do those as well. Did you replace the entire assembly, or is it lenses only for the back.  I see both options.
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #5 on: February 04, 2012, 03:08:30 PM »
Quote from: rcannon409 on February 04, 2012, 02:51:41 PM
ZG, the rear signals look great. I think I'll do those as well. Did you replace the entire assembly, or is it lenses only for the back.  I see both options.

The ones I went with were the lenses only, they match the front perfect. Tuff to see it in the pics but in person it really makes a difference.  8)
 
FYI, the rear blinker lenses are the same for the ZX14, so if you search by that you'll find more options, happy hunting!  ;D
Logged

Offline Glennn

  • Full Member
  • ***
  • Posts: 195
  • Country: au
    • Metric Rider
Re: Flush Mount Signals....smoke
« Reply #6 on: February 04, 2012, 10:18:39 PM »
Oooooooh, something else to put on the list!
Logged
2012 Midnight Sapphire Blue 1400GTR
1999 Yamaha Road Star
Canberra, Australia
CDA #390

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: Flush Mount Signals....smoke
« Reply #7 on: February 08, 2012, 06:03:16 PM »
I ordered some rear "lenses only" so hopefully they will arrive this week.
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #8 on: February 08, 2012, 06:05:44 PM »
Quote from: rcannon409 on February 08, 2012, 06:03:16 PM
I ordered some rear "lenses only" so hopefully they will arrive this week.

Sweet, I think you'll like em RC since you already did the fronts, they match well.  8)
Logged

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: Flush Mount Signals....smoke
« Reply #9 on: February 08, 2012, 06:12:19 PM »
I hope so, but I'm sure I'll want the smoked tail light next..right????  This never ends.....
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #10 on: February 08, 2012, 08:16:51 PM »
Quote from: rcannon409 on February 08, 2012, 06:12:19 PM
I hope so, but I'm sure I'll want the smoked tail light next..right? ???  This never ends.....

True indeed, never ending is right...  :-\
 
I did the tinted tail light too, there's some pics of mine in this thread link below:
 
http://www.zggtr.org/index.php?topic=1731.0
 
Logged

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: Flush Mount Signals....smoke
« Reply #11 on: February 08, 2012, 08:31:35 PM »
Thanks ZG.  I showed some willpower (15 minutes)  then ordered one of those as well...LOL 
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #12 on: February 08, 2012, 08:34:03 PM »
Quote from: rcannon409 on February 08, 2012, 08:31:35 PM
Thanks ZG.  I showed some willpower (15 minutes)  then ordered one of those as well...LOL

 ;D ;D ;D
 
I've been told I'm a bad influence by some...
Logged

Offline The Pope

  • Full Member
  • ***
  • Posts: 792
  • Country: us
  • COG #9994 (NC AAD)
Re: Flush Mount Signals....smoke
« Reply #13 on: February 09, 2012, 03:33:58 AM »
Quote from: ZG on February 08, 2012, 08:34:03 PM
I've been told I'm a bad influence by some...

Yes! Yes you are!  :chugbeer:
Logged
The Pope
2011 C-14 Atomic Silver...... aka ImprovedSilverDammIt.

"The Universe is a contest between engineers making things idiot-proof and God making bigger idiots. So far, God is winning by a wide margin." Unknown author, well I don't know who said it.

Offline OCK913

  • Arena
  • Full Member
  • ***
  • Posts: 363
  • Country: us
    • The Orlando Riders Club
Re: Flush Mount Signals....smoke
« Reply #14 on: February 09, 2012, 06:03:37 AM »
Quote from: ZG on February 08, 2012, 08:34:03 PM

 ;D ;D ;D
 
I've been told I'm a bad influence by some...

What makes it worse is that you seem to have an unlimited budget and that just adds additional pressure on the rest of us.
I can hear it already ..... "I don't care what ZG's wife lets him buy, you are not spending any more money on that bike"
Logged
.............................................................
            2009 Kawasaki C14 - Black

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: Flush Mount Signals....smoke
« Reply #15 on: February 09, 2012, 06:25:52 AM »
Yes, you are a bad influence.....plus, I think there is a rule that says you cannot have a smoked turnsignal lens next to a clear brakelight.  If not, there should be!
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #16 on: February 09, 2012, 10:02:56 AM »
Quote from: The Pope on February 09, 2012, 03:33:58 AM
Yes! Yes you are!  :chugbeer:

Quote from: OCK913 on February 09, 2012, 06:03:37 AM
What makes it worse is that you seem to have an unlimited budget and that just adds additional pressure on the rest of us.
I can hear it already ..... "I don't care what ZG's wife lets him buy, you are not spending any more money on that bike"

Quote from: rcannon409 on February 09, 2012, 06:25:52 AM
Yes, you are a bad influence.....

 :rotflmao: :grouphug:
Logged

Offline timbo

  • Full Member
  • ***
  • Posts: 132
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #17 on: February 09, 2012, 08:38:09 PM »
Just ordered the smoke front and rear turn signals and the smoke LED brake light. You guys are costing me money!  :thumbs:
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Flush Mount Signals....smoke
« Reply #18 on: February 09, 2012, 09:10:43 PM »
Quote from: timbo on February 09, 2012, 08:38:09 PM
Just ordered the smoke front and rear turn signals and the smoke LED brake light. You guys are costing me money!  :thumbs:

 8) :thumbs:
Logged

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: Flush Mount Signals....smoke
« Reply #19 on: February 10, 2012, 04:48:35 PM »
The rear lenses arrived today.  Far easier to install than the front signals.  One screw and the cover pops off.
Logged
  Go Up
« previous next »