Any news from anyone on this one? Clamp-on MRA.
I've got the stock '09 and want to mount on that.
What about the MRA that mounts with screws, will that fit on a stock windshield?
Thanks for any intel.
Yep. I just installed it about a week ago. I had the same complaint that someone else was having about the NC V-stream It's much better than the stock shield (the tall option for my '09), but with my torso length and my 2" risers, my head was just into the airstream and I was getting significant buffeting at highway speeds. Installed the MRA clamp-on and problem is gone. I can ride at highway speed with my shield open and it's still quiet. I'll add a few observations:
--The disclaimer is that it will fit "most" windscreens, but it is pretty adjustable. Unless you have a shield with a really radical top contour, I can't imagine that it wouldn't fit.
--The instructions that come with it are challenging. You have to simultaneously refer to the instructions sheet, and two different parts lists. Everything goes together pretty logically, but you start out with a LOT of little parts.
--The clamps are not small. They are very noticeable in your field of view.
--The spoiler is very adjustable in both height and angle.
--In a heavy headwind, the screen is even more flappy than normal (which is already pretty flappy). I do worry about how much stress I'm putting on windscreen brackets and such (the Kawi, stuff that is--the MRA stuff is solid).
--With this kit, you actually get everything you need for either the clamp-on or the drill and bolt installation. If you try the clamp-on and don't like it, you already have all the parts (including the drill stencil) to convert it to the drill and bolt-on if you want.
