No matter what I did, bike had real bad surging . I had long talk with Tony ( I think he’s a co-owner), we got the servo set up just right, all should be good.
It wasn’t, still surgy.
Talked to him again, did diagnostics. Computer was set for 13, should be set to four.
We adjusted, still doesn’t work right .
At this point he said it was strange, never happens like this.
I told him I bought unit straight from them, not used, I was only installer .
He called again and we adjusted the speed with bike on sidestand. I put bike into fourth, Ktrac warning came on as it hit 45 and I set the speed.
This should work he said, if not, email back.
It didn’t. I pulled my bike over, went back into speed adj mode again, hit 45 and hit the set button.
Pulled over, stopped, turned off bike . I then restarted bike, hit 50 and cruise and ...it worked!
I tried cruise at 56, and 26, worked fine. I was limited in testing as there was 5:30pm traffic, will try tomorrow , but so far , I’m happy.
The problem was not my sorry mechanical skills, it was an improperly adjusted computer. Had it been properly set, I would had this thing nailed down a week ago.
I am not bad mouthing them, I post this in case someone has calibration problems, maybe it’ll help.
The weather has been beautiful here, I should have the bike reassembled by fri, at which point we are supposed to get a ton of rain ( there are flood warnings) .
Oh well, that’s life!