Checked the battery and connections after I got home and found that both were loose. I removed the battery, cleaned up the connections and reinstalled. I also checked and cleaned the ground connection.
Hit the key, and it unlocked! Rode to work, and everything is back to normal.
Just one question- Do you use a baterry tender?
Not sure who you are asking but in my case, no. I ride all year and the bike rarely sits for very long although it did last winter 'cause the snow in the driveway would not clear.
Brian
Putting graphite in a greased lock will gum it up. A solvent based spray will redistribute the existing grease, so almost any type will work. An alcohol based lock deicer has the least chance of depositing an incompatible lubricant." Boeshield T-9 does a good job of preventing rust without gumming up the mechanical parts. Graphite will clog & jam the lock mechanism over time and doesn't provide rust protection.
Not sure who you are asking but in my case, no. I ride all year and the bike rarely sits for very long although it did last winter 'cause the snow in the driveway would not clear.
Brian
Actually Brian- i was asking the thread originator- Fixxer. As more people use battery tenders, they do fewer inspections on the battery connections. The battery tender may be a good idea, but how many threads have we seen from owners with poor grounds/connections? In the old days when we pulled our batteries each fall, and installed them in the spring, this issue wasn't as prevalent as it is today. Just my $.02, I also forget that not everyone is bogged down in snow during the winter. chrs- mat
Better save it Jim- I understand more vehicles will soon include KiPass (or HoPass, or SuzPass, etc.).
Take a look at this:
According to Kirby (I do not read Japanese, and I am not sure he does either) this article is blaming the plane crash in the photo on the LACK of KiPass and is urging the Prime Minister and the entire gov't of Japan to pass legislation requiring it on all new vehicles built.
Like I said, I don't read the language but that's what the little fella' tells me....
Brian
Umm. You have the paper turned sideways. That is why you couldn't read it.
I've never used a battery tender on this bike. As far as the battery connections staying tight once they are tightened..on my bike with the stock battery...they wouldn't stay tight. I re-tightened them at every oil change.
Checked the battery and connections after I got home and found that both were loose. I removed the battery, cleaned up the connections and reinstalled. I also checked and cleaned the ground connection.
Hit the key, and it unlocked! Rode to work, and everything is back to normal.
Just one question- Do you use a baterry tender?
I've never used a battery tender on this bike. As far as the battery connections staying tight once they are tightened..on my bike with the stock battery...they wouldn't stay tight. I re-tightened them at every oil change.