« previous next »
Pages: 1 2 »   Go Down

Author Topic: What would the ultimate BRAKE UP be??  (Read 11543 times)

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
What would the ultimate BRAKE UP be??
« on: August 10, 2014, 04:32:08 PM »

If cost was no object what would the ultimate brake set-up be for the Connie?  ???


I'd like to hear your guys opinions and suggestions to make sure I'm not missing anything in my searches so far...




I'm thinking of upgrading my brake set-up next, so far this is what I've found that I think would be a decent setup, but still undecided...  :-\






Brembo front brake calipers in the nickel plated...


http://www.ebay.com/itm/261540898123?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649










Brembo rear brake caliper in the matching nickel plated...


http://www.ebay.com/itm/261544728530?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649










Brembo 320mm T-drive rotors...


http://www.ebay.com/itm/Brembo-T-Drive-Front-Floating-Rotor-Kit-ZX6R-636-ZX10R-ZX14R-ZX14-Z750-Z1000-/261533648948?pt=Motorcycles_Parts_Accessories&hash=item3ce49ec834&vxp=mtr












And then run Brembo pads all around, which one still TBD...






What do you folks think? Any thoughts good or bad or any suggestions on another/better path?  ??? :-\



Logged

Offline Cuda

  • Full Member
  • ***
  • Posts: 782
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #1 on: August 10, 2014, 05:01:31 PM »
No ZG you got it all wrong...
It's BimBo's


They look BAD
Logged
Old and SLOW                   COG 11405
Gods waiting room Naples
2011 Atomic  Silver

Offline VirginiaJim

  • Administrator
  • Elite Member
  • *****
  • Posts: 11365
  • Country: england
  • I've forgotten more than I'll ever know...
    • Kawasaki 1400GTR
Re: What would the ultimate BRAKE UP be??
« Reply #2 on: August 10, 2014, 06:42:29 PM »
The brakes on the C14 are the best (when they aren't warping) I've ever experienced on a motorcycle.  I don't think I would do anything to them except redesign them so that they didn't warp.  The Brembos are bling.  Granted they are very good, but still bling never the less..especially nickel coated.  Of course, nickel is my favorite finish these days but typically I buy faucets, fixtures, locks, and ceiling fans with that finish....not so much bike stuff.  You know, why not nickel instead of chrome?  Chrome is so old fashioned.
Logged
"LOCTITE®"  The original thread locker...  #11  2020 Indian Roadmaster, ABS, Cruise control, heated grips and seats/w/AC 46 Monitoring with cutting edge technology U.N.I.T is Back! Member in good standing with the Knights of MEH.

Offline Daytona_Mike

  • Arena
  • Full Member
  • ***
  • Posts: 825
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #3 on: August 10, 2014, 11:06:48 PM »
Jay, may I suggest  getting the 330mm rotors. I think these even look better than those T-drives. I think you can get them in black or gold.
http://tinyurl.com/ofzv4zs
Logged
If you still have fuel in the tank, you are not lost yet
Most motorcycle problems are caused by the nut that connects the handlebars to the saddle

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #4 on: August 11, 2014, 07:23:06 AM »
Quote from: Daytona_Mike on August 10, 2014, 11:06:48 PM
Jay, may I suggest  getting the 330mm rotors. I think these even look better than those T-drives. I think you can get them in black or gold.
http://tinyurl.com/ofzv4zs


Thanks for the help Mike.  :chugbeer:


I think the Brembo's only come in a 310 or 320, are you saying that those rotors you posted the link too are a better way to go vs the Brembo's? Are there any other brands that you know of that make a 330?  :-\
Logged

Offline Daytona_Mike

  • Arena
  • Full Member
  • ***
  • Posts: 825
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #5 on: August 11, 2014, 10:48:23 AM »
Yes Jay, BrakeTech makes a 330mm which I already thought you knew about. I am running the Chinese 320mm from ebay on my C10 and they seem just as good as the EBC's I had on before. The Doc is running them on his ZX14 and same thing- they seem to work well unless they start glowing red again.
http://forum.cog-online.org/index.php/topic,47664.msg387297.html#msg387297
Logged
If you still have fuel in the tank, you are not lost yet
Most motorcycle problems are caused by the nut that connects the handlebars to the saddle

Offline Big Mike

  • Jr. Member
  • **
  • Posts: 70
  • Country: us
  • Binghamton, NY
Re: What would the ultimate BRAKE UP be??
« Reply #6 on: August 11, 2014, 10:56:10 AM »
Quote from: ZG on August 10, 2014, 04:32:08 PM
If cost was no object what would the ultimate brake set-up be for the Connie?  ???


I'd like to hear your guys opinions and suggestions to make sure I'm not missing anything in my searches so far...




I'm thinking of upgrading my brake set-up next, so far this is what I've found that I think would be a decent setup, but still undecided...  :-\






Brembo front brake calipers in the nickel plated...


http://www.ebay.com/itm/261540898123?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649










Brembo rear brake caliper in the matching nickel plated...


http://www.ebay.com/itm/261544728530?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649










Brembo 320mm T-drive rotors...


http://www.ebay.com/itm/Brembo-T-Drive-Front-Floating-Rotor-Kit-ZX6R-636-ZX10R-ZX14R-ZX14-Z750-Z1000-/261533648948?pt=Motorcycles_Parts_Accessories&hash=item3ce49ec834&vxp=mtr







And then run Brembo pads all around, which one still TBD...

What do you folks think? Any thoughts good or bad or any suggestions on another/better path?  ??? :-\

ZG,

I have no experience with Brembo on a C-14, but have ridden bikes and owned a bike with Brembo's they are top shelf..

Other than price I can't see you getting hurt with them..  :)

Logged
2014 Concours 14 Candy Cardinal Red..
HeliBar Risers/Knight Design Lowered Pegs/Super Shark Skins/Cee Bailey Ultra Tour/TechSpec Snake Skin

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #7 on: August 11, 2014, 11:06:27 AM »
Quote from: Daytona_Mike on August 11, 2014, 10:48:23 AM
Yes Jay, BrakeTech makes a 330mm which I already thought you knew about. I am running the Chinese 320mm from ebay on my C10 and they seem just as good as the EBC's I had on before. The Doc is running them on his ZX14 and same thing- they seem to work well unless they start glowing red again.
http://forum.cog-online.org/index.php/topic,47664.msg387297.html#msg387297


Thanks Mike, yes one of the local shops I use also recommended the BrakeTech rotors. I've never used their rotors before though, thanks for the help.  :chugbeer:
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #8 on: August 11, 2014, 11:07:10 AM »
Quote from: Big Mike on August 11, 2014, 10:56:10 AM
ZG,

I have no experience with Brembo on a C-14, but have ridden bikes and owned a bike with Brembo's they are top shelf..

Other than price I can't see you getting hurt with them..  :)


 :thumbs: :chugbeer:
Logged

Offline rocknrod

  • Full Member
  • ***
  • Posts: 195
  • Country: us
  • 2013 C14 - Blue
Re: What would the ultimate BRAKE UP be??
« Reply #9 on: August 11, 2014, 12:30:20 PM »
Quote from: VirginiaJim on August 10, 2014, 06:42:29 PM
The brakes on the C14 are the best (when they aren't warping) I've ever experienced on a motorcycle.  ...
Amen to that I'm not sure I would want any more responsive brakes. But then again we all have different riding styles.
Logged
Master Chief, US Navy, Retired
2013 C14 Blue, Fenda Extenda, Radiator Screen, HeliBars, Glove Box Mod, 3M paint Protector, Rostra Cruise Control, TechSpec Tank Grips, Lowering Links and Side Stand, Front lowered, Lowered center stand, Balwin Seat.

Offline BruceR

  • Arena
  • Full Member
  • ***
  • Posts: 242
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #10 on: August 11, 2014, 01:05:30 PM »
You might as well price out the master cylinders while you're at it.

Logged

Offline rocknrod

  • Full Member
  • ***
  • Posts: 195
  • Country: us
  • 2013 C14 - Blue
Re: What would the ultimate BRAKE UP be??
« Reply #11 on: August 11, 2014, 03:06:04 PM »
And the brake lines  :thumbs:
Logged
Master Chief, US Navy, Retired
2013 C14 Blue, Fenda Extenda, Radiator Screen, HeliBars, Glove Box Mod, 3M paint Protector, Rostra Cruise Control, TechSpec Tank Grips, Lowering Links and Side Stand, Front lowered, Lowered center stand, Balwin Seat.

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #12 on: August 11, 2014, 03:42:15 PM »
Quote from: BruceR on August 11, 2014, 01:05:30 PM
You might as well price out the master cylinders while you're at it.


Agreed, good one Bruce, thanks.  :chugbeer:
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #13 on: August 11, 2014, 03:43:17 PM »
Quote from: rocknrod on August 11, 2014, 03:06:04 PM
And the brake lines  :thumbs:


Already have braided lines all around, so at least I'm good to go on that already!  :) :chugbeer:
Logged

Offline gPink

  • Arena
  • Hero Member
  • *****
  • Posts: 5690
  • Country: cn
  • MMVIII C XIV
Re: What would the ultimate BRAKE UP be??
« Reply #14 on: August 11, 2014, 04:34:01 PM »
I've had good dealings with these folks.

http://www.spieglerusa.com/
Logged

Offline Conniesaki

  • Full Member
  • ***
  • Posts: 580
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #15 on: August 11, 2014, 09:06:46 PM »
Nickel? Isn't all-black the (current) goal?
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #16 on: August 11, 2014, 09:17:07 PM »
Quote from: gPink on August 11, 2014, 04:34:01 PM
I've had good dealings with these folks.

http://www.spieglerusa.com/


Indeed GP, I've used Spiegler many times on other bikes!  :thumbs:
Logged

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #17 on: August 11, 2014, 09:50:05 PM »
Quote from: Conniesaki on August 11, 2014, 09:06:46 PM
Nickel? Isn't all-black the (current) goal?


 :-\
Logged

Offline Spanky

  • Full Member
  • ***
  • Posts: 283
  • Country: us
Re: What would the ultimate BRAKE UP be??
« Reply #18 on: August 12, 2014, 08:03:15 AM »
I am in the "this bike has the best brakes ever" club. I am curious to see if there is a big improvement with after market brakes. I am subscribed and waiting to see.
Logged

Offline MAN OF BLUES

  • Arena
  • Sr. Member
  • ****
  • Posts: 2898
  • Country: 00
  • WHISKEY.Tango.Foxtrot.
Re: What would the ultimate BRAKE UP be??
« Reply #19 on: August 12, 2014, 12:33:02 PM »
Quote from: Daytona_Mike on August 10, 2014, 11:06:48 PM
Jay, may I suggest  getting the 330mm rotors. I think these even look better than those T-drives. I think you can get them in black or gold.
http://tinyurl.com/ofzv4zs

If he had a Ducati......
Logged

46 YEARS OF KAW.....  47 years of DEVO..
Pages: 1 2 »   Go Up
« previous next »