During the week end worked on my 09 connie with 40K and did for the first time the valve lash check and all valves were with in specifications specially the exhaust side , also replaced the spark plugs, air filter, throttle body sync, cam sensors seal, coolant , clutch fluid, but after clean everything perfectly put all together to be able to start the engine for the TB sync find out that the brand new cover gasket leaked and the exhaust side cam sensor also was leaking from were the wires come out from the sensor itself,
Have to order a new sensor and remove the cover again to apply sealant and put some washers under the 7 bolts that hold the cover down to compensate for the original washers that did not ordered a new ones and are already compressed and thinner than they are when new