Author Topic: FS - C10 Body Parts - Side Covers - Tail Cover - Tail Piece etc. - FS  (Read 1266 times)

Offline Stasch

  • Full Member
  • ***
  • Posts: 414
  • Country: us
Various C10 body pieces for sale.

All prices are shipped to CONUS.

I have a PayPal account and will also accept money orders through the mail.

Be sure to let me know which part you want or are inquiring about.


- Tail Rack Cover - Includes the white thumb screw - $35
       Like new condition - no cracks - 2005 Beige color
       (This covers the OEM luggage rack)


 - Tail Rack Cover for 1987 / 1988 - $19
       In good serviceable condition - could use repainting or buffing.  No cracks or missing chunks.
       Its an 87 or 88 red, but not the bright red - perhaps the Canadian darker red?

 - Tail Fairing 2005 Beige - all there - good condition. - $33

 - Right Side Cover 2005 - $15
       Some scratches above mount bolt in colored area - may rub out
       No cracks or missing chunks

 -  Left Side Cover 2005 - $25
       Like new condition

(Package Deal for both 2005 Side Covers - $35)


 - Right Side Cover 1990 Bright Red - $18
       minor scuffs and wear - may rub out
       No cracks or missing chunks
       Has a ~1.5" hole that a PO must have put in to allow access to the rear shock air valve.

 - Left Side Cover 1990 Bright Red - $18
       minor scuffs and wear - may rub out
       No cracks or missing chunks

(Package Deal for both 1990 Side Covers - $30)

- Front Fender 2003 *Color - $35
       *This will need painting unless you really don't care about how it looks
       Has small crack at front edge which has been plastic welded - sold now.
       Other scratches and small surface gouges are filled and sanded - ready for paint.
       Includes bolts to mount to forks.
       
« Last Edit: March 02, 2014, 10:57:48 AM by Stasch »
Stan Visser - - - - - - - - - - - - - - - - - -- - - - - - > C10 STUFF FOR SALE - Parts List

He IS a racer, hence the forward lean!!  by: Mettler1

Offline Stasch

  • Full Member
  • ***
  • Posts: 414
  • Country: us
Re: FS - C10 Body Parts - Side Covers - Tail Cover - Tail Piece etc. - FS
« Reply #1 on: February 28, 2014, 07:02:35 PM »
Reduced prices on the stuff that's left.

The stuff needs to go to good homes where it'll be used.
Stan Visser - - - - - - - - - - - - - - - - - -- - - - - - > C10 STUFF FOR SALE - Parts List

He IS a racer, hence the forward lean!!  by: Mettler1

Offline sgilbert14

  • Full Member
  • ***
  • Posts: 253
Re: FS - C10 Body Parts - Side Covers - Tail Cover - Tail Piece etc. - FS
« Reply #2 on: March 02, 2014, 09:06:10 AM »
Package Deal for both 1990 Side Covers - $30

Can you send me a pic, PM sent

Offline Stasch

  • Full Member
  • ***
  • Posts: 414
  • Country: us
Re: FS - C10 Body Parts - Side Covers - Tail Cover - Tail Piece etc. - FS
« Reply #3 on: March 02, 2014, 11:04:27 AM »
Pics of 1990 side covers are below.

They look pretty dirty - they have pine pollen on them.  All the cruddy stuff will come right off.  I would have washed them but there's 12 " of snow out there and its 11 degrees F !

Couple corrections to the descriptions.  Didn't see these things until I got them out in the sun.

Left cover has a few light scratches from trying to install fuel tank with covers on by PO?  They will rub out by hand.

Pinstripes ARE complete on both covers.  THe arced mark on the right side cover is residue from a piece of thin masking tap that I thought was a pinstripe that had come loose.

Right cover has a ~1.5" hole that a PO must have put in to allow access to the rear shock air valve.

Stan Visser - - - - - - - - - - - - - - - - - -- - - - - - > C10 STUFF FOR SALE - Parts List

He IS a racer, hence the forward lean!!  by: Mettler1

Offline Stasch

  • Full Member
  • ***
  • Posts: 414
  • Country: us
Re: FS - C10 Body Parts - Side Covers - Tail Cover - Tail Piece etc. - FS
« Reply #4 on: March 02, 2014, 12:52:53 PM »
one more pic
Stan Visser - - - - - - - - - - - - - - - - - -- - - - - - > C10 STUFF FOR SALE - Parts List

He IS a racer, hence the forward lean!!  by: Mettler1