« previous next »
  Go Down

Author Topic: Fairing seal brackets  (Read 2879 times)

Offline jdhreiss

  • Jr. Member
  • **
  • Posts: 34
  • Country: us
Fairing seal brackets
« on: May 14, 2013, 03:20:55 PM »
  HELP!   Trying to figure out where the right side fairing seal mounts is making me crazy (should have taken photos)  And I have the shop manual which shows screws where there are rivets.  Anyone have a photo of the foam rubber/plastic bracket which also has the rubber piece that goes to the radiator hose? I have it all back together except for the bracket and the right upper fairing. 

Joe R.
Kelso, WA
Logged
Joe Reiss
SW Washington

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8948
  • Country: us
  • 2011 Silver
Re: Fairing seal brackets
« Reply #1 on: May 14, 2013, 05:08:36 PM »
Quote from: jdhreiss on May 14, 2013, 03:20:55 PM
  HELP!   Trying to figure out where the right side fairing seal mounts is making me crazy (should have taken photos)  And I have the shop manual which shows screws where there are rivets.  Anyone have a photo of the foam rubber/plastic bracket which also has the rubber piece that goes to the radiator hose? I have it all back together except for the bracket and the right upper fairing. 

You should put the model year of your bike in your avatar or signature, it will greatly assist people trying to help.

I learned a while ago about taking quick photos with my phone before disassembling something :)  The factory manual is fairly good, but sometimes is a bit hard to interpret.   Unfortunately, I am not sure what you are describing... hopefully someone else will know.  If not, you might need to post a photo of what you describing.
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline VirginiaJim

  • Administrator
  • Elite Member
  • *****
  • Posts: 11365
  • Country: england
  • I've forgotten more than I'll ever know...
    • Kawasaki 1400GTR
Re: Fairing seal brackets
« Reply #2 on: May 14, 2013, 06:01:14 PM »
Max is right...we need a bike year 08 09 10 11 12 13?
Logged
"LOCTITE®"  The original thread locker...  #11  2020 Indian Roadmaster, ABS, Cruise control, heated grips and seats/w/AC 46 Monitoring with cutting edge technology U.N.I.T is Back! Member in good standing with the Knights of MEH.

Offline jdhreiss

  • Jr. Member
  • **
  • Posts: 34
  • Country: us
Re: Fairing seal brackets
« Reply #3 on: May 14, 2013, 06:44:50 PM »
Sorry about bike info.  Its a 2008, ZG1400A8F, The part is shown on page 587, the 4th photo down from the top of the page of the 2008 shop manual.  The part is listed as Pad, Heat Guard, Right Hand, on the microfiche and it's part numbers are in the #39156 series (39156-f, 39156-g, etc)
Logged
Joe Reiss
SW Washington

Offline VirginiaJim

  • Administrator
  • Elite Member
  • *****
  • Posts: 11365
  • Country: england
  • I've forgotten more than I'll ever know...
    • Kawasaki 1400GTR
Re: Fairing seal brackets
« Reply #4 on: May 14, 2013, 07:35:26 PM »
Thanks.. :finger_fing11:   Of course that's the classic C14 and the best of all of them.
Logged
"LOCTITE®"  The original thread locker...  #11  2020 Indian Roadmaster, ABS, Cruise control, heated grips and seats/w/AC 46 Monitoring with cutting edge technology U.N.I.T is Back! Member in good standing with the Knights of MEH.

Son of Pappy

  • Guest
Re: Fairing seal brackets
« Reply #5 on: May 14, 2013, 08:19:20 PM »
So, one new Seattle area guy, a potential 'nuther new Seattle area rider, myself (Port Orchard) and now Kelso!!  The world is so in trouble ;D

I'll see what I can see to see if what I can see helps you see what needs to be seen ;)
Logged

Offline VirginiaJim

  • Administrator
  • Elite Member
  • *****
  • Posts: 11365
  • Country: england
  • I've forgotten more than I'll ever know...
    • Kawasaki 1400GTR
Re: Fairing seal brackets
« Reply #6 on: May 15, 2013, 04:10:14 AM »
Quote from: jdhreiss on May 14, 2013, 06:44:50 PM
Sorry about bike info.  Its a 2008, ZG1400A8F, The part is shown on page 587, the 4th photo down from the top of the page of the 2008 shop manual.  The part is listed as Pad, Heat Guard, Right Hand, on the microfiche and it's part numbers are in the #39156 series (39156-f, 39156-g, etc)

Page 587?  My book isn't numbered like that.  It has pages like 10-11.
Logged
"LOCTITE®"  The original thread locker...  #11  2020 Indian Roadmaster, ABS, Cruise control, heated grips and seats/w/AC 46 Monitoring with cutting edge technology U.N.I.T is Back! Member in good standing with the Knights of MEH.

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8948
  • Country: us
  • 2011 Silver
Re: Fairing seal brackets
« Reply #7 on: May 15, 2013, 05:38:32 AM »
Quote from: VirginiaJim on May 15, 2013, 04:10:14 AM
Page 587?  My book isn't numbered like that.  It has pages like 10-11.

Indeed, but the unauthorized PDF "copy" of it that is floating around is numbered like that.  Which means he probably did not legally obtain the "service manual".  But I am not the copyright police, so let's pretend I didn't post!
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline Boomer

  • Full Member
  • ***
  • Posts: 924
  • Country: gb
  • Wickford, UK
    • Boomers GTR Site
Re: Fairing seal brackets
« Reply #8 on: May 16, 2013, 07:27:40 AM »
Quote from: VirginiaJim on May 14, 2013, 06:01:14 PM
Max is right...we need a bike year 08 09 10 11 12 13?
And don't forget 07 for those of us who bought an 08 model in 07.  ;D
Logged
George "Boomer" Garratt
Wickford, UK

Offline VirginiaJim

  • Administrator
  • Elite Member
  • *****
  • Posts: 11365
  • Country: england
  • I've forgotten more than I'll ever know...
    • Kawasaki 1400GTR
Re: Fairing seal brackets
« Reply #9 on: May 16, 2013, 08:18:50 AM »
Quite!  I consider those Early Adopters...
Logged
"LOCTITE®"  The original thread locker...  #11  2020 Indian Roadmaster, ABS, Cruise control, heated grips and seats/w/AC 46 Monitoring with cutting edge technology U.N.I.T is Back! Member in good standing with the Knights of MEH.
  Go Up
« previous next »