Bleeding is fairly simple I think. Says to use DOT 4 brake fluid, have to get some, all I have is DOT 3.
Have to find the bleeder valve and the wrench to use on it. Take off seat, cap on brake fluid. Fill it. Pump up brake pedal. Loosen bleeder valve, push out fluid to bottom of pedal, tighten valve, refill fluid to top, repeat. Repeat, repeat. Eventually after doing this several time I will have pushed all the fluid through the system. I assume there is only one bleeder valve but I could be wrong.
If you have done this would appreciate confirmation of procedures. Thanks.