Nice , this will be my next mod thanks for the idea,( is that yellow light in your tach meter for the ABS?)
I remember that some were using the flash to pass switch for this mod.
Basic question alert! So coming off the switch, the green wire goes to the ground and the grey to the soldered wire from the display. Is that correct?
Did think about that, but I do tend to use the flash to pass switch
One of the problems with the FTP (Flash to Pass) switch is that in heavy rain it actuates the high beams by itself. Anyone looking at this switch used by Kwak would be horrified as to how it's put together. One needs to slather it with dielectric grease to keep it functional in heavy rain as the housing is not very waterproof. I don't know if it's been improved in the 10 models on up but with the 08/09s it has this problem.
We get a question every so often on that phenomenon every so often. For that reason, I wouldn't use it and instead go with an after market waterproof switch of some sort.