Kawasaki Concours Forum
The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: copdocpvd on April 28, 2014, 02:34:32 PM
-
I got a new HID kit for my 2013, am curious as to where you guys are putting the ballasts so they are secure and reasonably out of sight.
Pictures a plus
P
-
I mounted mine on top of the rubber air intake tubes on each side. Just loosely tie- wrap them so they do not fall out; any significant pressure on the tie- wrap will cause the intake tubes to crush. Actually, my ballasts are stacked with my Power Commander, the ignitors for the HIDs and a couple of other things. The C-14 is tight on room....
Brian
I got a new HID kit for my 2013, am curious as to where you guys are putting the ballasts so they are secure and reasonably out of sight.
Pictures a plus
P
-
Thanks, Brian
-
Here's a nice write-up with pictures courtesy of A&R that has been posted elsewhere on the forum. I did mine slightly different (on the left side, I velcro'ed the ballast to the outside of the fuseblock).
http://www.aandrmotorsport.com/directions/concourshidinstructions.html (http://www.aandrmotorsport.com/directions/concourshidinstructions.html)
-
Here's a nice write-up with pictures courtesy of A&R that has been posted elsewhere on the forum. I did mine slightly different (on the left side, I velcro'ed the ballast to the outside of the fuseblock).
http://www.aandrmotorsport.com/directions/concourshidinstructions.html (http://www.aandrmotorsport.com/directions/concourshidinstructions.html)
That is the brand I purchased and the instructions I used to install it.
-
A-1 setup love the beams say " LazerBro's " let there be light. :cool: