Kawasaki Concours Forum

The C10, aka Kawasaki Concours - The Original => The Bike - C10 => Topic started by: Tele130 on July 03, 2011, 05:05:24 PM

Title: Clutch line banjo bolts.
Post by: Tele130 on July 03, 2011, 05:05:24 PM

What's the pitch of these bolts?

Title: Re: Clutch line banjo bolts.
Post by: Tele130 on July 04, 2011, 12:56:42 PM

I think their 1.25, but I'm not sure. I don't wanta pay $10.00 each and find out I screwed up. Not like that has ever happened.  :rotflmao:

Title: Re: Clutch line banjo bolts.
Post by: gtr1000 on July 07, 2011, 02:10:43 AM

Sorry Doug, only just seen your post.

Yep, banjo bolts are M10 x 1.25 - just got some supplied with my new HEL clutch line.

As an aside, looks like HEL have supplied me with the wrong type of fitting for the slave cylinder. They've given me a 70 deg fitting when in fact it perhaps should be a 45 deg one. Even a 20 deg one as per the master cylinder end would do the trick.

FYI, these bolts also fit the blanked off mirror mounts on the brake and clutch master cylinders but they have to be cut down in length. Useful for when I fitted my heated grips control.