Kawasaki Concours Forum
Marketplace => Wanted => Topic started by: COGnosticat0r on September 28, 2012, 06:48:16 AM
-
The subject says it all, and if you have the modified c-stand we can swap my oem for the modified
PM or cognosticator at yahoo dot com
Thanks
-
Jerry, keep an eye on the zx forums if you can't find a C14 specific muzzy system.
-
Jerry, keep an eye on the zx forums if you can't find a C14 specific muzzy system.
Thanks I will check it out. Will a full zx14 system be a direct bolton for the C14 except for the centerstand mod
-
It was for me. The mid pipes were a little tight but there was enough flex in the donut gaskets to make them work. I modified the center stand myself. I also bought Muzzys left side hanger bracket for about 80 bucks. The side stand was just touching the pipe so I put a weld bead on the contact pad so it would clearance about 1/8 inch. I've got less than 700 in the system which included carbon cans. :)
-
It was for me. The mid pipes were a little tight but there was enough flex in the donut gaskets to make them work. I modified the center stand myself. I also bought Muzzys left side hanger bracket for about 80 bucks. The side stand was just touching the pipe so I put a weld bead on the contact pad so it would clearance about 1/8 inch. I've got less than 700 in the system which included carbon cans. :)
IIRC there is a thread that describes how to modify the cstand, I will go looking.