Kawasaki Concours Forum
The C10, aka Kawasaki Concours - The Original => The Bike - C10 => Topic started by: Coyote Chris on May 25, 2011, 10:04:57 PM
-
Has anyone installed magnetic drain plugs in their C10? At 10 bucks a piece they are alittle steep but it might be a good indication from change to change what is happening in the motor.....
Chris who doesnt want to "make metal"
-
No I have not as of yet, but I'm going to that you just reminded me . LOL . I think 10.00 is very ,very cheap for what they do. Prevent metal particles from continuously circulating though you motor.
http://www.magneticdrainplug.com/ (http://www.magneticdrainplug.com/)
Cheers
Ron
-
I have them in both my bikes and there is something on them every time I drain the oils so I do not think that they are a waste of money; besides anything the makes you feel warm and fuzzy about your bike is money well spent in my book. Given that I rolled my own with .25" x .50" Rare Earth Magnets that I drilled and pressed into my stock plugs; I can pick up at least a 16" adjustable wrench with them.
-
I ran them on my KLR 650 starting at the first oil change. You would be amazed at the amount of metal they pick up. I will install one on the C-14 on my next oil change
-
Prolly a little over kill, but i have one in each of the motor drain plugs, and i also have one in the final drive drain plug.
+1 on you will be amazed at the amount of metal clumped on the magnet each oil change
-
I have them in both my bikes and there is something on them every time I drain the oils so I do not think that they are a waste of money; besides anything the makes you feel warm and fuzzy about your bike is money well spent in my book. Given that I rolled my own with .25" x .50" Rare Earth Magnets that I drilled and pressed into my stock plugs; I can pick up at least a 16" adjustable wrench with them.
Dayum!! No need to wonder why your credit cards won't work for you all the time, Tony!
-
Dayum!! No need to wonder why your credit cards won't work for you all the time, Tony!
I tell you it's crazy how strong some of these Rare Earth Magnets are; the place that I get them from has many assorted sizes and they have a great big sign over them warning you to be extra carefull when you handle them cause when correctly lined up they will come together with such force that they will pinch, break skin, and even cause blood blisters. :yikes:
-
The rare earth magnets i ordered at one point, if you held them a few inches from eachother, and let them go, they would even come together with such force, that they break into pieces.
-
I have a REM I salvaged from a computer hard drive at work. If you attach it to a metal desk drawer (and be careful of your fingers when you do) it requires pliers to remove it. :o
-
I have used a magnet from an old hard drive on the end of the drain plug. (till my magnetic plug arrived)
As said in the previous post be careful they will take your finger off if near a large metal mass.
-
OK, you guys have talked me into it. In big recip aircraft engines, we have an oil screen with presure sensors on either side. If chips clog the screen, the pressure differential trips a light in the cockpit that says, "That's all folks!" We call that Making metal and at the Reno Air races, when a big engine makes metal, its time to call it a day. If nothing else, it will be interesting to compare the chip load from time to time. Of course, the magnet doesnt work too well on non ferous metal.
-
All these strong magnets are going to keep your reciprocating parts from moving...
:D
-
All these strong magnets are going to keep your reciprocating parts from moving...
:D
I fixed that with a pair of 8D Marine Diesel Batteries wired in series for 24VDC and a starter from a CAT 3516....... You should see the alt too!