Looks like 92153D and 92200Thanks!
Nothing worse than having your balls go missing.
I see 92200 says washer. I don't have a washer on mine. Is it one of the white plastic washers or steel?
Whatcha gonna work on next?
I saw on another thread recently somebody said to strategically weld a nut to it, I don't have a welder in my garage but maybe you do? Good luck MP, that sucks bro...
You guys are brutal. At least I'm not a CDA member, oh crap.
He has that new battery coming from Murph's to install...
I think that was 'Danger Will Robinson, Danger.' The guy who did the voice for the robot just died. I don't know if the guy who flailed the hooks around is alive or not....Brian
hehehe, he gets to take the cover off again.
Silly guy, the bolt is broken, I can't even get the cover on!
He didn't get the bolt out, he twisted the head of it off. Bolt is still in the frame......
Here ya go Brent
True but remember- nothing screams bad craftsmanship like wrinkles in your duct tape....Brian
I went thru the same issue when I was pulling the battery for winter storage. Three out of the 4 bolts I had to remove stripped out. I initially tried a bolt extractor with no luck. Then I tried drilling into the bolt with a bit that was smaller than the shank of the bolt and carfully drilled in most of the length of the bolt. I tried the bolt extractor repeatedly during this process until the bolt lost enough of it's holding power to come out. I ordered replacement bolts which are not yet installed and I would really like to know that when I put them in I wouldn't have the same problem again.
I put anti-seize on those bolts so they don't get stripped out the next time I remove them
I bugger up one bolt and you guys tease to no end.This guy buggers FOUR bolts and he gets advice.