Nope. Not sure what thing is! You can find it here: http://www.g2ergo.com/I didn't see one listed for the Concours 1400
I didn't see one listed for the Concours 1400
Yep it's a 15 min install if you have an air compressor
Can you please explain how to use a compressor to remove the grip?
Get you one of these, or similar, with a small tip.
Give the grip a blast from the outside edge while you pull on the grip with your other hand. If you work the nozzle around a bit you'll find that you can 'inflate' the grip and get it to slide around. Just keep working the nozzle around while you pull on the grip. Once you get the grip part way off move the nozzle around to the inside of the grip and keep it going till you get it pulled off.
Do the same thing in reverse to get a new grip on.
The OEM heated grips? Sure can. Did it on mine.Good to know. One of my issues with the hand cramping/pinky numbness issues is that I am trying to control the switchy throttle, and end up putting a lot of pressure on my hand keeping it steady. I still have to adjust the slack out of the throttle cable, and if that does not help I'll get a tamer.
Well it seems to me that the throttle response might be smoother but that tiny brake lever would be hard to use in a quick stop. Of course since you could only ride to the end of yer air hose it might just work
Seriously, I am happy with my G2. Ifin you don't have one of them air pressers just use a soda straw and blow yer butt off