« previous next »
  Go Down

Author Topic: Bag lock removal  (Read 3050 times)

Offline tthompsr

  • Jr. Member
  • **
  • Posts: 98
  • Country: us
  • 2009 Black Concours
Bag lock removal
« on: June 22, 2011, 10:49:50 AM »
Anybody here have experence removing the bag locks? If so is there any tricks to save me from completely disassembling the lock assembly? (from what I can see It looks like you have to drill out all the rivets to get the lock cyclinder out).
Logged

Offline martin_14

  • Sr. Member
  • ****
  • Posts: 1379
  • Country: ar
  • know who you are
Re: Bag lock removal
« Reply #1 on: June 22, 2011, 03:23:00 PM »
Quote from: tthompsr on June 22, 2011, 10:49:50 AM
Anybody here have experence removing the bag locks? If so is there any tricks to save me from completely disassembling the lock assembly? (from what I can see It looks like you have to drill out all the rivets to get the lock cyclinder out).

If I may: what are you trying to do?
Logged
Build bridges, not walls.

Education is important. Riding my bike is importanter.

Offline VirginiaJim

  • Administrator
  • Elite Member
  • *****
  • Posts: 11365
  • Country: england
  • I've forgotten more than I'll ever know...
    • Kawasaki 1400GTR
Re: Bag lock removal
« Reply #2 on: June 22, 2011, 03:54:38 PM »
Sounds like he is trying to remove the bag lock.....sorry Martin, too much tequila. :rotflmao:
Logged
"LOCTITE®"  The original thread locker...  #11  2020 Indian Roadmaster, ABS, Cruise control, heated grips and seats/w/AC 46 Monitoring with cutting edge technology U.N.I.T is Back! Member in good standing with the Knights of MEH.

Offline Pokey

  • Arena
  • Sr. Member
  • ****
  • Posts: 2487
  • Country: us
  • WESTERVILLE OHIO 'Twit"
Re: Bag lock removal
« Reply #3 on: June 22, 2011, 03:56:30 PM »
Just leave your bags off...............
Logged
2006 DL1000  2006 SV650
08 C14 "gone"

"All we have to do is decide what to do with the time given to us". Gandalf the Grey

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: Bag lock removal
« Reply #4 on: June 22, 2011, 04:13:05 PM »
Quote from: Pokey on June 22, 2011, 03:56:30 PM
Just leave your bags off...............

Won't they just fall off or get stolen all on their own...  ;)
Logged

Offline tthompsr

  • Jr. Member
  • **
  • Posts: 98
  • Country: us
  • 2009 Black Concours
Re: Bag lock removal
« Reply #5 on: June 22, 2011, 05:33:34 PM »
I'm trying to replace the mismatched bag locks that the dealer installed on my bike, I have new tumbler's that now match the ijnition and gas tank lock, but I wouldn't let them install the locks because they scratched my bag installing the wrong ones! any help would be greatly appreciated.
« Last Edit: June 23, 2011, 08:19:53 AM by tthompsr »
Logged

Offline tthompsr

  • Jr. Member
  • **
  • Posts: 98
  • Country: us
  • 2009 Black Concours
Re: Bag lock removal
« Reply #6 on: June 23, 2011, 08:21:44 AM »
bump
Logged

Offline Jeremy Mitchell

  • Sr. Member
  • ****
  • Posts: 1756
  • Country: 00
  • COG#9899
Re: Bag lock removal
« Reply #7 on: June 23, 2011, 09:56:51 AM »
I have switched a bag lock between two seperate bags and IIRC there are 4 bolts that hold the lock/handle assembly to the bag.  They will just pull off of the bag after you remove the bolts.

If you are wanting to remove the actual lock cylinder from the lock/handle assembly then I would reccomend finding a skilled locksmith since the one that I took my lock into said that it would take them around 30 minutes ($70) to switch them between the two.  I decided that I would just leave it the way that I had it.
Logged
Keeping the economy going, one tank of fuel and two tires at a time.

Offline tthompsr

  • Jr. Member
  • **
  • Posts: 98
  • Country: us
  • 2009 Black Concours
Re: Bag lock removal
« Reply #8 on: June 23, 2011, 10:22:33 AM »
Thanks for the reply Jeremy, Yes I'm looking to replace the lock cyclinders, right now I'm carrying 4 keys around and would like to cut that number down, I've had the lock/handle assembly off the bag and from the looks of it everything
is put together with rivets.
Logged
  Go Up
« previous next »