Got the connie all together and was going to take it down to the station and fll it with gas and ride it to work tomorrow. Put the key in, turned it on and hit the button and no go. I knew immediately what was wrong so I pulled the plugs and cranked the gas out of the cylinders. Put the plugs back in and fired it up and then oil and gas mix came gushing out of the air box. Drained the oil, was a lot in there, at least a gallon of gas with the oil so it got a good flushing out. I checked the petcock and it didn't shut off at all. Took it apart and found corrosion on the seat so I cleaned it up and it seems to work but now I don't trust it.
What would you guys do? Is there a manual alternative?