The paint on the 92 is almost bulletproof....it is 2 shot base coat, and the stripes are applied tape, and the whole tank has a
very thick clearcoat over it.
When I built COGZilla, I used parts from various year bikes, some with the stripes. It was a royal p.i.t.a. to cut thru the clear, down to base, and remove that tape, before re-painting.
If you like the black/red schema (personally it is my second favorite color scheme of all...), I would consider simply doing a careful wet sanding of all the parts, and shoot it over again with a good urethane clear coat. if the black is unscratched and in tact, it will come out great, and the added clear will give it depth.....
j.m.h.o.
from someone that
has repainted a Conni, I will warn you it is a LOT of work to prep those parts..... you're fingers will be shot.