well, i can feel something right at the end of travel, slight up and down, in the fork legs(bottom part) lifting up on the tire more than say the forks themselves. stem feels ok, but since im checking, its easy and i have the machined socket.
(concern is that it could be internal in the forks, thinking if i mark my preload, then crank it all in and recheck the noise, or take it out and see if it gets worse,
) i'll check the axle, and all bolts everywhere that would or could have been off. at least that will eliminate stuff.
when the springs were installed, he cut my original nylon spacers, then made something else after the racetech springs were so long. not sure if i am seeing stickshion(?) when the springs unload. heck i don't know.
thanks again for any help, advise, guidance.
Joel