Author Topic: C14 aftermarket parts for sale (Read 6153 times)

DocPigskin · « **on:** October 30, 2012, 08:15:44 PM »

Connie is gone so now it is time to sell off the extras. I am going to post a pic of the bike with the stuff on it. If you need additional photos let me know but most of it is packed up and ready to ship so I will have to unpack it for more pics. Add shipping to all prices.

1. Corbin modular seat. Less than 1000 miles on it and less than 50 miles on the back seat - $400 -SOLD
2. V-stream Winshield (minor wear marks, but no damage. Just normal wear from being used). $100.00 - SOLD
3. Givi 55L Monokey Trunk w/luxury liner. (one minor scuff of about 2 inches long by 1/8" wide on the side of trunk. Hard to notice but full disclosure.) - $300.00 - SOLD
4. Phil's rack extender with adaptor for the Givi trunk - $100.00 - SOLD
5. Murph's risers - $70.00 - SOLD
6. Techmount - $50.00 ( I will also throw in the GPS unit I used with this set-up- TomTom EASE for free). - SOLD

I think that is it for now. The guy who purchased the bike bought the 2 Bros Pipe with the bike, the Cox Radiator guard, grip puppies, tank protectors, and cover.

DocPigskin · « **Reply #1 on:** October 30, 2012, 08:17:24 PM »

more pics

DocPigskin · « **Reply #2 on:** October 30, 2012, 08:18:50 PM »

couple more pics

Mugsy19 · « **Reply #3 on:** October 31, 2012, 08:42:26 PM »

Is the Corbin seat standard? Meaning not lowered. I'm 6'2" and need the seat to be at least the height of the stock seat. Is the Corbin heated. Will it fit all C14 model years?

Thanks,
Mark

The Pope · « **Reply #4 on:** November 01, 2012, 03:50:16 AM »

- The "standard" Corbin is lower than the stock seat.
- Can't tell by the photos if they are heated or not.

Will have to wait for the OP to answer.
- This will fit 2008-2012 C14's.

as a side note .... you may want to do a search on "lowering pegs". I'm 6'1" and ride with (what I think is the) standard Corbin, but I have added Buell pegs which are around 1" lower than stock.

DocPigskin · « **Reply #5 on:** November 01, 2012, 09:46:18 AM »

The seat is not heated. It is lower than the stock seat by around maybe 1/2"-1".

connie and me · « **Reply #6 on:** November 01, 2012, 05:49:18 PM »

Where are you located? would be nice to actually see some stuff before buying for once, lol, interested in windshield, I am in Delano.

DocPigskin · « **Reply #7 on:** November 01, 2012, 08:19:08 PM »

Quote from: connie and me on November 01, 2012, 05:49:18 PM

Where are you located? would be nice to actually see some stuff before buying for once, lol, interested in windshield, I am in Delano.

I am in New Ulm. That would be totally cool if you wanted to check it out before hand. I am actually of thinking of running to Mills Fleet Farm in Carver (thinking around 11) in the morning. Not sure how available you are but I could bring it with and you could look at it then or maybe meet somewhere along the way. Would save on shipping too

Let me know if you are interested. Probably best to text me 563-650-6491 if you think that might work.

Armyguns · « **Reply #8 on:** November 02, 2012, 06:59:33 AM »

PM send on Phils rack entender.

Cold Streak · « **Reply #9 on:** November 02, 2012, 07:53:47 AM »

Does the trunk snap into the standard Kawi mounting pad? This is the one with the two big slots on the back with the tab in front that snaps into the trunk. I'm talking front to back with reference to the trunk, not the bike. Do you have lights on the trunk or is it just reflectors? Finally, what if the diagonal measurement? Wondering if my tent would fit into it.

DocPigskin · « **Reply #10 on:** November 02, 2012, 07:58:09 AM »

Quote from: Armyguns on November 02, 2012, 06:59:33 AM

PM send on Phils rack entender.

PM Rec'd. Message sent

DocPigskin · « **Reply #11 on:** November 02, 2012, 08:01:13 AM »

Quote from: Cold Streak on November 02, 2012, 07:53:47 AM

Does the trunk snap into the standard Kawi mounting pad? This is the one with the two big slots on the back with the tab in front that snaps into the trunk. I'm talking front to back with reference to the trunk, not the bike. Do you have lights on the trunk or is it just reflectors? Finally, what if the diagonal measurement? Wondering if my tent would fit into it.

Not sure on the Kawi pad? The trunk has the two slots on the end that sits towards the front of the bike, and a larger hole on the back that snaps down into the mounting plate. It does not have lights, just reflectors. The diagonal measurements (interior) are approx. 22".

DocPigskin · « **Reply #12 on:** November 05, 2012, 06:42:42 PM »

Update: #4 above is sold.

mvjr1904 · « **Reply #13 on:** November 06, 2012, 01:26:22 PM »

#1- Corbin, still available?
Did you like the Corbin, Was it what you thought or heard about the Corbin?

DocPigskin · « **Reply #14 on:** November 06, 2012, 03:34:58 PM »

Quote from: mvjr1904 on November 06, 2012, 01:26:22 PM

#1- Corbin, still available?
Did you like the Corbin, Was it what you thought or heard about the Corbin?

Corbin seat is still available. I just posted it on the COG forum as well. I LOVE the looks of the Corbin on the C-14. I just think it adds so much to the bike. As far as comfort goes, I have never owned a Corbin before this one so I wanted to try one out. At the end of the day, I would get another one in the future. So yes, I think the Corbin was/is a very nice seat (sorry, long winded anwser to a short question).

mvjr1904 · « **Reply #15 on:** November 07, 2012, 11:34:43 AM »

Dibs on the Corbin. PM Sent

DocPigskin · « **Reply #16 on:** November 07, 2012, 02:31:41 PM »

Corbin is now Sold. Enjoy Tom.

tjpgi · « **Reply #17 on:** November 08, 2012, 07:06:23 AM »

Quote from: DocPigskin on November 07, 2012, 02:31:41 PM

Corbin is now Sold. Enjoy Tom.

Thanks Greg

DocPigskin · « **Reply #18 on:** November 08, 2012, 04:22:33 PM »

Windshield is sold.

DocPigskin · « **Reply #19 on:** November 15, 2012, 11:34:04 AM »

Bump

New Price on the risers and Techmount. Will sell seperate.
Risers - $70.00 + shipping
Techmount- $50.00 + shipping (will also include the GPS unit I used with this set-up for free) - SOLD
Givi E55 Trunk with luxury liners - $280 plus shipping

News:

Author Topic: C14 aftermarket parts for sale (Read 6153 times)