Hello from eastern Iowa.I own and ride an '86 c10. The bike was previously owned by my father, from whom I bartered it.I have owned various older (1970s-1980s) kawis in the past. And being a married with children working fool, I do all my own bike maintenance and repair.The bike had been sitting dormant since 2018, when i resurrected her about a week before a multiple state cross country ride last summer.
bump
I was confused about this as I had checked the part number on the fiches, but it seems the part number for that bolt changed between the 2008 model and the 2012.That bolt that holds the link pipe to the frame on the 2008 it is 92153-1930, but on the 2012 is is 92153-1837, so is indeed the same as the brake caliper bolts on the later models.
berna1201
berna1201 - thanks for the answer - that's it!! I did forget to mention I have a Delkevic exhaust. That went on probably 10 years ago. Since the Delkevic does not have the same bracket as the stock muffler, there is no need for the bolt. I must have left it in just to hold the two bushings in place - I really don't remember. The two bushings were probably also on the trailer floor, but I did recognize them as being part of the same assembly so I ignored them.Thanks again - I feel better now
exhaust bolts 92153-1837the same reference as for the front brake calipershttps://www.partzilla.com/product/kawasaki/92153-1837
Hi Berna,None of those bolts have that shape head. The suspension ones you suggest have parallel sides on the head and the exhaust one has a much wider, flatter head than the bolt he shows.
Hello
it is obvious in the photo