Here's the CalSci Medium held in place in front of the stock shield with some painter's tape and pinch clamps. Note that it's a bit taller in the middle, which is why it is almost tall enough for me.
And the V-stream. A good bit taller than the stock tall shield.
Additionally, the V-stream sits further away from the rider at the top due to the shape of the shield.
The way to get these is to PM me your address and I'll pack them back up and send them on to you! The 'free' bit is that you get them sent to you for free, and the 'cost' is the shipping cost to the next forum member who wants to give them a shot. Savvy viewers will note that I've added the CalSci shield cutout to my stock shield. This helps, but isn't quite enough. I'll probably end up picking up a CalSci Large, once it percolates up past the cut line on the budget list.