I am very happy to report both front and rear sensors are installed and working!
It’s not the float, as my range function still works. I tried that as the guy in the video said that helped him. The only other thing is the low fuel level switch. And that’s part of the fuel pump assembly.
I will mention my fuel gauge issue as it is different. My gauge is erratic. Often I will fill up to the very brim but the gauge will not display the top bar when I crank up. Then 10 or 20 miles down the road the top bar will appear. Later in the tank range the gauge will show empty although I know I have half a tank left. I do have Brian's low fuel eliminator.
Has anyone been able to identify a suitable sled (OEM) style Autel or similar non-Kawi TPMS sensor for this purpose?
No. I haven't seen any TPMS sensors that have a similar style to the Kawasaki sensor. I've been running the automotive style sensors for over 600 miles without issue. The automotive sensor barely sticks out in the inside of the tire than the screw part of the Kawasaki sensor.This was the bit I was concerned about. If it doesn't protrude farther than rim edge, it should be rugged enough for the intended use.