Received mine yesterday - mounted today. Came with some of the best installation instructions I've ever seen. Really well done. Looks great. Seems to be very well-engineered (strong) solution. Might mention that existing hex head bolts behind radiator are red Locktited so can be difficult to remove.
I'm well pleased.
How awesome is Ryan? You rock, dude.
... If any of you guys would like me to send this washer out to you at no charge, please call or email me and request it! ...
I appreciate your continuing willingness to keep us happy customers happy.
Use the PM process to contact, Ryan, please. Posting of email addys isn't wise. The search robots will harvest them and then the world ends.
Hopefully someone may take you up on that, Alan
Off topic....it's been a very long time since I was in your neck of the woods. Spent several years (as a brat) at RAF Upper Heyford in the early 60s.
Good luck on the bars. Hopefully someone will be traveling your way. How much is the shipping over there?
I've calculated shipping to be about $90. That's pricey but not completely outrageous. I've had some other customers order from places like Australia, Croatia, and Malaysia and shipping to them was $200+. $90 for shipping really isn't too bad considering the ridiculously fair price of the bars themselves. With shipping, you'd be paying about $360 for the front set alone which is still less than the cost of similar products from some of our competitors. Also, it's less than you'd be paying to replace parts of the fairing if you were to dump the bike.
About to order the Revco footpegs. Will I need the 7/8ths clamps or the 1.25's?
Thanks!
For the 2010-2012 or the 2008-2009? The 2008-2009 Canyon Cages are 7/8" and the 2010-2012 Canyon Cage is 1". Neither of them are 1.25".
Inb4 someone asks "Why the difference?": We made the 2008-2009 Canyon Cage 7/8" so it would match the Saddle Bag Guards we've been making for that bike for years now. We changed the Saddle Bag Guards to 1" in 2010 so we decided to make the Canyon Cage for that bike that size as well so it would also match. There is almost no variance in strength though because both bars have the same wall thickness which has more of an effect on tubing strength than overall diameter does.