Zg,
Where did you get the waterproof covers for the gerbing hookup just below your seat on the left side?
The permanent controller on gerbing's website shows it comes with tiny plastic plugs, but I like your setup!
Thanks,
Bill
Did you use the jacket this morning? It was 27 in Roy at 8. Past the chilly side.
Zg,
i ordered the dual permanent controller and the ports from gerbing yesterday. I'm looking at your photos and it looks to me like you have a portable controller powering the mounted ports. Will i need to do the same to replicate your setup?
Thanks,
Bill
Thanks ZG,
im thinking of putting the ports where you did and the controllers are probably going to be mounted through the black glove box panel.(i have 2011, in black, of course!) I figure if somehow i screw up the install, that plastic panel is gonna be less expensive to replace . This looks like it will work perfectly for me. Thanks for posting the pictures.
Bill
Thanks ZG,
im thinking of putting the ports where you did and the controllers are probably going to be mounted through the black glove box panel.(i have 2011, in black, of course!) I figure if somehow i screw up the install, that plastic panel is gonna be less expensive to replace . This looks like it will work perfectly for me. Thanks for posting the pictures.
Bill
like this?
i was thinking having them stacked to the right of the grip heater, it there's enough room.
Bill
like this?
Thanks for that link, I'll have to check my liner when I get home today.
Here is where I mounted my Gerbing setup, not the best to see where the knob is but you get the idea. Just make sure there is enough space underneath the plastic.
I'll take cooler temps and roads with some actually turns and elevation changes to them anyday over flat Florida bro...
FL has the very best turns in the country. We ride on Daytona, JenningsGP, and Homestead-Miami.Twice a year? I didn't know FL had such short riding seasons
Hey, I'm new, so, uh... what's that "compartment" under your handlebars, on the tank? It has a release. I'm still not sure what's under this panel, or what this panel on the top of the tank is for. The bolts keep calling me to unscrew them and look...Gen 1 C14s had a different glove box, AKA, sandwich warmer.