I'm having zero luck with the Kaw USA parts fiche, trying to compare the zx/zzr abs stuff, as they don't show parts for the ZZR..
Id check to see if the wheel speed sensors, and sensor discs compare to this on the zg, first thing, which I'm having difficulty finding for the ZZR...
If they compare, then the "pulse count " thru the ecu should allow the pump interchange, as long as the harness and fittings are the same...
Worst case scenario is if you can pick up one from a ZZR, and install it, and have someone with a KDS system verify functions of the system, then id try it.
The brake discs and sensors seem to be the same, since they have the same part number. Funny thing: I also looked at the fiche at a couple of US sites, and it seems like the ZZR has no ABS, or I might have pressed the wrong button. So I went to the European sites and voilĂ , ABS module is there.
Picking up a module from a ZZR is not a problem. Returning it if it is the wrong one, would be.
Series 1 ZG14 and ZX14 (ZZR1400) ABS parts are interchangeable ie. they will function, perhaps not to the manufacturer's satisfaction though. Series 2 ZG14 sensors & wheel rings are not interchangeable with series 1.
"series 1" of the ZX14 would be...? 2006-2011? the one with the 1352cc engine? or is there any sub-division in there too? I'm completely ignorant about the ZX14. I once drove the new one, with the 1441cc engine, and as long as I don't get a malign tumor I won't go near that bike again.