could somebody forward the pictures to me. Thanks. aaes@shaw.ca
I have some and they are probably the same pictures - I didn't take them.
Edit- I think these are bafflecomy mufflers because it looks like it is now a straight shot thru the main baffle. Maybe a hole saw was used, not sharpened rebar.
Those in the know, could you please confirm that if I hit it hard enough with my 3# deadblow and yell enough expletives at it, that the midpipe part will separate from the muffler part once the rivets are removed?
Thanks!
AZ - expect it to be an exercise in frustration. These things are built like a sealed up automotive miffler; not like a straight pipe muffler that can be repacked. I tried to get inside my zx9 muffler; it has the same construction. cut it open, and you're basically going to destroy it and probably play h*ll trying to put it back together. there's multiple levels of metal sandwiched and welded together internally. UGH - Steve
Learned something tonight. Know what the rivets on the end of the muffler by the midpipe hold on?
That little collar. Nothing else.
So next step is going to be finding someone with a chop saw to cut them to the desired length. Then I'll remove the cap from the part I cut off and get some cheap baffles, since the pipes will be so short I might be able to use just a single baffle.