I did some investigation into the SV brackets, short of trying to mount them. I'm pretty sure you would need to use some sort of spacers to place the caliper in the right position relative to the plane of the rotor. The SV brackets mount to the outside of the caliper tabs on the forks, and the SV tabs are undoubtedly a different thickness than the C10 tabs, so the SV brackets would put the caliper in a different side-to-side postion than is needed for the C10. BTW, I stopped my investigation when I heard Jim S. was working on a solution, so IMO, I would wait till those adapters are available, since they will fit without any adjustments.
HTH,