Hello Steve in Sunny Fla
WARNING JUST INFORMATION I HAVE NOT YET TESTED
Only water pumps with the clip behind the oil seal on the motor side are removable.
There exist two diameters mechanical seal therefore necessary to remove the pump to check if the axis is not too rusty and measure the le seal mechanical
After request from the seller I ordered the mechanical seal for water pump
http://www.gpzzone.co.uk/acatalog/Flexible_hoses__pump__Thermostat__coolant_etc.htmlPrice: 27£
Seller
Hi Richard
The measurement is the widest point of the seal, not the diameter of the pump.
Measure the lip on the seal; it will be either 32 or 35mm.
Best wishesModel water pump number: 990 – 1 KAWASAKI ZG 1000 1986 A1
Diameter for delivery of the mechanical seal
A little bit of dough to seal around the perimeter mechanical seal
Warning
do not forget to mount the bearing before mounting the mechanic seal
Problem
Rust on the axisPersonally, I'm going with a little dough to seal around the perimeter seal
Manufacture : AESSEAL