We would be most grateful..
Sorry Jim,
The text is gone and I have no notes on the size of the resistor. The indicator is an LED and I 'believe' the resistor is something very low, like 56 Ohms installed inline with the
Red supply wire at position #1 of the indicator/Display connector as described on page 16-104 of the hard copy 2010 Service manual.
I'll remove the heat-shrink tubing from my resistor if I'm ever back in that area. I had to try several different values to get the indicator dimmed but not off. As it is, my indicator is visible in daylight but not blinding at night. Mine is on a lot since I have the headlamp modulators installed.
I will add a picture here:
Mick