« Reply #6 on: October 17, 2012, 09:24:21 PM »
If you have a 2nd gen C14, get yourself a ratcheting box end wrench for the upper right bolt to the brace. Not certain the size but I think it was 16mm. You can get a socket on it by squeezing the water hose but much easier with a ratcheting box end.
+1
Either that or cut the fairing (as shown in the other threads) so it is possible to wrestle the fairings on AFTER you install the bars.
![](http://zggtr.org/Themes/default/images/ip.gif)
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc