Railing or metal plate

[charliespain]

Has anyone found or railing or
Metal luggage plate for top case shad sh 50


Thanks¡

[Flathead]

Check the farkle link 
http://www.zggtr.org/index.php?topic=288.0

Phils rack
http://www.philsfarkels.com/

[philipintexas]

I have a Shad-50 on my bike, very roomy and nicely finished. It does present a small problem because the mounting plates have a screw that goes from underneath the metal plate into the top plastic plate. When it's in place you can't access that screw. I modify them but it requires sending the plates to me. Not practical if you are located outside the US.

http://s214.photobucket.com/albums/cc213/philipintexas/Phils%20rack%20and%20SHAD%20trunk/?action=view&current=P3160092.jpg

http://s214.photobucket.com/albums/cc213/philipintexas/Shad%2050%20mounting%20rack/?action=view&current=PICT4818.jpg

http://s214.photobucket.com/albums/cc213/philipintexas/Shad%2050%20mounting%20rack/?action=view&current=PICT4819.jpg

[charliespain]

Hello again
Possibly I have not explained well.
What I seek is not the support for the trunk.
What I am looking for a metal grille that sits on top shad sh trunk 50.
The pictures that I attached the grids are placed in the trunks of the Mark GIVI
I'm looking for brand SHAD, SH Model 50
I attached some pictures as examples

regards

[gPink]

The Shad SH-40 has an optional rack that might work.

•SHAD SH-40 (CA) Top Case in Standard Black (D0B4600) with D1B40PA Standard Bottom Plate and optional D0B4099 Cargo Rack (CA designation).

[charliespain]

PHOTOS

[gPink]

http://www.cli-maxridinggear.com/servlet/the-190/Shad-SH-40-Cargo/Detail

http://www.cycleluggage.com/shad-sh40c-top-case.html

http://www.webbikeworld.com/motorcycle-luggage/shad-luggage/

[charliespain]

Thanks for your information gpink
I'm looking for that item or one like it but for the SH 50, which is the trunk that I have.
The picture attached is of SH 40 and quisira something out of metal but for the SH 50

Thanks again

[gPink]

Charlie, Shad has a factory in Barcelona. Why not check there. Maybe they have something in development.
This is from their US website.
http://www.shad.es/en/shad-usa/

PRODUCTS

NADSL currently equips the following seats and top cases for the principal European motorcycle production centres, exporting seats for some brands such as Triumph, to their production centres in Indonesia. The design, development, production and storage of our entire OEM equipment is carried out at our central production facilities in Mollet del Vallés, located on the outskirts of Barcelona.