I just put her away for the season and started wondering what to do during the COLD DARK TIMES. Torque cams came to mind. Gunna see about finding some $$. Have you done a cam swap vid yet?
Let Steve do your carbs so you can take full advantage of the Torque Cams installation. I promise it will be the best money you ever spend on your Connie...........
Mine will idle that smooth at 1000 RPM's, it also idles that smooth at 500 RPM's but won't go any lower than that.
I can turn the idle adjusting knob counter clockwise bringing the idle down to 500 RPM's but continued turning won't get it any lower than that, it just continues to idle nice and smooth at 500.
Mine will idle that smooth at 1000 RPM's, it also idles that smooth at 500 RPM's but won't go any lower than that.
I can turn the idle adjusting knob counter clockwise bringing the idle down to 500 RPM's but continued turning won't get it any lower than that, it just continues to idle nice and smooth at 500.