Kawasaki Concours Forum
The C10, aka Kawasaki Concours - The Original => Accessories and Modifications - C10 => Topic started by: Freightshakertech on May 20, 2011, 10:10:18 PM
-
Hi guys, too bad the site went down. Seems we lost some valuable information. I'm looking for the KMW emblems that one of our members produces. Anyone have any info on this? Appreciate your help, thanks. David :)
-
Here it is.
http://ruddbow.com/main/gallery/?album=1&gallery=11 (http://ruddbow.com/main/gallery/?album=1&gallery=11)
-
I *just* found mine after being lost for like 2 yrs.
Now... where to put them.... :o
-
You can see where I put mine. These things are worth ten times their purchase price in humor value.
Pic attached below:
-
You can see where I put mine. These things are worth ten times their purchase price in humor value.
Pic attached below:
I get all kinds of different comments from mine. Must say, they are quite a conversation piece.
-
Well since I have a well known last name (and it's not Darwin)...
=Laserjock= 8)
-
Mettler1 Thank for posting that. I got dad some of his decals for christmas and was wantingto purchase some more.
-
I like mine emblems. They make my bmw friends smile.
-
Here's my KMW. I get quite a few double takes with the emblems. ::)
-
Thanks Mettler. I ordered two of the new ones which are "Beemer" blue. Look forward to having a little fun with them. 8)
-
Here it is.
http://ruddbow.com/main/gallery/?album=1&gallery=11 (http://ruddbow.com/main/gallery/?album=1&gallery=11)
I guess I should be flattered that my KMWs are being copied, even at a higher price.
-
Just for the record, I'm pretty sure spd2918 was the originator of these, which are now being copied by the ruddbow folks. spd2918 (Brad) makes em better and cheaper, and for more models (SMW, HMW, etc. His are full multilayered vinyl, whereas the ruddbow one appears to be printed. In other words, it will not last as well or as long. He's too humble to toot his own horn..........
I forget what they cost from Brad, but maybe he will pop back in with that info. You can reach him at b r a d e s l e r at yahoo dot com to order direct.
-
Just for the record, I'm pretty sure spd2918 was the originator of these, which are now being copied by the ruddbow folks. spd2918 (Brad) makes em better and cheaper, and for more models (SMW, HMW, etc. His are full multilayered vinyl, whereas the ruddbow one appears to be printed. In other words, it will not last as well or as long. He's too humble to toot his own horn..........
I forget what they cost from Brad, but maybe he will pop back in with that info. You can reach him at b r a d e s l e r at yahoo dot com to order direct.
+1 :)
-
Not to mention its really fun to park next to a Beemer and watch everybody scratch their heads :rotflmao:
(http://i1033.photobucket.com/albums/a411/snarf1971/IMG00038.jpg?t=1306849882)
(http://i1033.photobucket.com/albums/a411/snarf1971/IMG00039.jpg?t=1306850050)
(http://i1033.photobucket.com/albums/a411/snarf1971/IMG00041.jpg?t=1306850050)
-
Brad is the person that started these. I also purchased his bag reflector kit, it's been 3 or 4 years now and no problem whatsoever. I get plenty of double takes, especially BMW riders :o and lots of questions like "what is a KMW?"
D.
-
Hey, glad some one cleared that up. Thanks
I knew the decals were out there but didn't know there were copy cat makers.
I'd rather go with the original.
-
What is the difference between the two, other than price? Just curious, see.
-
Quote from 2fast:
spd2918 (Brad) makes em better and cheaper, and for more models (SMW, HMW, etc.
His are full multilayered vinyl, whereas the ruddbow one appears to be printed. In other words, it will not last as well or as long.
-
Thanks for all the support!
I make the KMWs from individually cut pieces of solid color vinyl- the same stuff I use on squad cars and taxis. I (or my my wife) layer them by hand to make the graphic. The other guys use a machine that prints color onto white vinyl much the same way your printer prints on paper. The result is a nice looking graphic that will sun fade over time. They can make more complex designs quickly and very cheaply.
My KMWs are $5 each and shipping is $2 no matter how many you'd like. I can be paypal'd at b r a d e s l e r @ y a h o o . c o m (the spaces need to be removed).
I don't make much money doing these, but I enjoy how people like them. My stuff can be seen at the Nationals every year. As mentioned I also make a 6 piece rear bag reflective sets for the Classic Connie for $20 (+ $3 shipping). They are black in the daytime and lights up white at night. Since the Connie is a stretched Ninja I made up some "NinjaXL" graphics for $6 each.
I will add a C14 rear bag reflective set if someone wants to loan me their bags for a couple of hours for a pattern. You will get a free set or two! I am in Superior WI, 3 miles for Aerostich.
Thanks again!
-
What does the reflective set look like? I'm trying to imagine where 6 pieces go...
-
What does the reflective set look like? I'm trying to imagine where 6 pieces go...
All face towards the back:
One on outer lid.
One below turn signal.
One above turn signal.
Repeat on other bag.
-
Oh. Well, that makes sense.
-
OK. Here's a similar decal on my bike a few years ago.
I gotta get one for the C-14
-
Well I finally put them on! Haven't had any comments yet but looking forward to some fun. Here's a pic of them on. :P
-
Nice...... tell me more about your fairing lite please.
Cheers
Ron
-
Thanks for all the support!
I make the KMWs from individually cut pieces of solid color vinyl- the same stuff I use on squad cars and taxis. I (or my my wife) layer them by hand to make the graphic. The other guys use a machine that prints color onto white vinyl much the same way your printer prints on paper. The result is a nice looking graphic that will sun fade over time. They can make more complex designs quickly and very cheaply.
My KMWs are $5 each and shipping is $2 no matter how many you'd like. I can be paypal'd at b r a d e s l e r @ y a h o o . c o m (the spaces need to be removed).
I don't make much money doing these, but I enjoy how people like them. My stuff can be seen at the Nationals every year. As mentioned I also make a 6 piece rear bag reflective sets for the Classic Connie for $20 (+ $3 shipping). They are black in the daytime and lights up white at night. Since the Connie is a stretched Ninja I made up some "NinjaXL" graphics for $6 each.
I will add a C14 rear bag reflective set if someone wants to loan me their bags for a couple of hours for a pattern. You will get a free set or two! I am in Superior WI, 3 miles for Aerostich.
Thanks again!
Do you have any pics of these graphics?
-
Do you have any pics of these graphics?
+1
-
;D Ron are you refering to the lights which take the place of the reflectors? They are LEDs amber in color and I wired them in so they work as side markers and flash alternately with the blinkers. Does that answer your question? :o
-
;D Ron are you refering to the lights which take the place of the reflectors? They are LEDs amber in color and I wired them in so they work as side markers and flash alternately with the blinkers. Does that answer your question? :o
Yes it does, and you did a great job my friend. :thumbs:
Cheers
Ron
-
Never fails to confuse people...I love it. 8)
-
Here's mine, just don't forget some extra decals, so they have to "look" for them.
Ride safe all.
Greg
-
Other than pm'ing spd2918, does anyone know how to get in touch with him? I have sent some pm's but it doesn't look as though he frequents this forum.
-
I just emailed Brad, so if he is around he will probably show up here pretty soon....
-
pm's bounce to my email, so I get 'em right away. ;D
I have KMW's and NinjaXL's for $5 each and shipping is $2 no matter how much you want.
I have Classic Connie 6 piece rear bag reflectives for $23 delivered. They are black in the daytime and silver-white when lights strike them at night. I will do a free set to the first C14 owner that leaves his bike with me for a few hours in the Duluth MN area (I need to make a pattern).
I can be paypal'd at bradesler@yahoo.com or snail mailed a regular old check to:
Brad Esler
1619 E 4th ST
Superior WI 54880
-
Here is mine ;D