Kawasaki Concours Forum
The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: Texanrider on May 19, 2011, 07:24:33 PM
-
Just bought one for a great price on eBay and was wondering if anyone had any mounting recommendations. If you have pics, even better.
Thanks
-
This isn't a GPS but it could get the mental juices flowing. This is my portable satellite radio. I bent up a piece of aluminum that I bought from the Home depot and bent and shaped it with a little propane torch and a bench vise and metal file. I bought a longer bolt and put 3 flat stainless steel washers underneath it so it wasn't crushing the plastic. This allows you to tighten it down really well. I plan on eventually replacing the plastic washer on top with a stainless one but haven't gotten around to it. I attached a belt clip so that I could remove the radio really easily. Having the bend and the leather case really absorbs the vibrations and have had no problems as of yet.
I plan on attaching a ram ball to the adjacent hole and mounting my Garmin. I haven't found a ram ball that has the same hole diameter but I have seen ram balls that mount into a flat base and have 2 mounting holes. In that case, all that would be required is a longer bolt and a long ram ball arm to get it high enough to be in view.
Hope that helps
-
Techmount
-
The Tom Tom Rider should have come with Ram mount options. mine came with all the stuff I needed from Tom Tom. The only thing I did was add a Ram ball to my handlebar risers.
-
RAM mount.
(http://i80.photobucket.com/albums/j180/stevewfl/Connie%2014/cortech1.jpg)
-
I've the TomTom Rider2 mounted on the bracket from Moma Kawa.
I seem to have a problem with the wire that hooks up to the bike. :-\
Not charging. Works fine in my truck.
Will take pics over the weekend.
-
With this product you can use a standard handle bar mount:
http://projektd.com/product_info.php?products_id=162&osCsid=676bc92bd8ea98f1c72c68e23ca38065 (http://projektd.com/product_info.php?products_id=162&osCsid=676bc92bd8ea98f1c72c68e23ca38065)
(http://projektd.com/images/products/handle-bars/framework/gtr1400/115_03b_pm.jpg)
-
I have this from projektd
http://projektd.com/product_info.php?cPath=27_39_46&products_id=89&osCsid=676bc92bd8ea98f1c72c68e23ca38065 (http://projektd.com/product_info.php?cPath=27_39_46&products_id=89&osCsid=676bc92bd8ea98f1c72c68e23ca38065)
(http://projektd.com/images/products/handle-bars/framework/gtr1400concours14/110_01Ba_p.jpg)
(http://im1.shutterfly.com/media/47a1df33b3127ccefc4cbcc3bda300000030O01CcNWzly0Yg9vPhw/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/)