Kawasaki Concours Forum

The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: charliespain on February 02, 2012, 12:08:53 PM

Title: Railing or metal plate
Post by: charliespain on February 02, 2012, 12:08:53 PM: Has anyone found or railing or
Metal luggage plate for top case shad sh 50

Thanks¡
Title: Re: Railing or metal plate
Post by: Flathead on February 02, 2012, 04:47:01 PM: Check the farkle link ;D
http://www.zggtr.org/index.php?topic=288.0 (http://www.zggtr.org/index.php?topic=288.0)

Phils rack
http://www.philsfarkels.com/ (http://www.philsfarkels.com/)
Title: Re: Railing or metal plate
Post by: philipintexas on February 02, 2012, 06:01:40 PM: I have a Shad-50 on my bike, very roomy and nicely finished. It does present a small problem because the mounting plates have a screw that goes from underneath the metal plate into the top plastic plate. When it's in place you can't access that screw. I modify them but it requires sending the plates to me. Not practical if you are located outside the US.

http://s214.photobucket.com/albums/cc213/philipintexas/Phils%20rack%20and%20SHAD%20trunk/?action=view&current=P3160092.jpg (http://s214.photobucket.com/albums/cc213/philipintexas/Phils%20rack%20and%20SHAD%20trunk/?action=view&current=P3160092.jpg)

http://s214.photobucket.com/albums/cc213/philipintexas/Shad%2050%20mounting%20rack/?action=view&current=PICT4818.jpg (http://s214.photobucket.com/albums/cc213/philipintexas/Shad%2050%20mounting%20rack/?action=view&current=PICT4818.jpg)

http://s214.photobucket.com/albums/cc213/philipintexas/Shad%2050%20mounting%20rack/?action=view&current=PICT4819.jpg (http://s214.photobucket.com/albums/cc213/philipintexas/Shad%2050%20mounting%20rack/?action=view&current=PICT4819.jpg)
Title: Re: Railing or metal plate
Post by: charliespain on February 03, 2012, 12:49:00 PM: Hello again
Possibly I have not explained well.
What I seek is not the support for the trunk.
What I am looking for a metal grille that sits on top shad sh trunk 50.
The pictures that I attached the grids are placed in the trunks of the Mark GIVI
I'm looking for brand SHAD, SH Model 50
I attached some pictures as examples

regards
Title: Re: Railing or metal plate
Post by: gPink on February 03, 2012, 04:27:00 PM: The Shad SH-40 has an optional rack that might work.

•SHAD SH-40 (CA) Top Case in Standard Black (D0B4600) with D1B40PA Standard Bottom Plate and optional D0B4099 Cargo Rack (CA designation).
Title: Re: Railing or metal plate
Post by: charliespain on February 03, 2012, 10:46:09 PM: PHOTOS
Title: Re: Railing or metal plate
Post by: gPink on February 04, 2012, 06:50:05 AM: http://www.cli-maxridinggear.com/servlet/the-190/Shad-SH-40-Cargo/Detail (http://www.cli-maxridinggear.com/servlet/the-190/Shad-SH-40-Cargo/Detail)

http://www.cycleluggage.com/shad-sh40c-top-case.html (http://www.cycleluggage.com/shad-sh40c-top-case.html)

http://www.webbikeworld.com/motorcycle-luggage/shad-luggage/ (http://www.webbikeworld.com/motorcycle-luggage/shad-luggage/)
Title: Re: Railing or metal plate
Post by: charliespain on February 04, 2012, 10:55:00 AM: Thanks for your information gpink
I'm looking for that item or one like it but for the SH 50, which is the trunk that I have.
The picture attached is of SH 40 and quisira something out of metal but for the SH 50

Thanks again
Title: Re: Railing or metal plate
Post by: gPink on February 04, 2012, 12:08:05 PM: Charlie, Shad has a factory in Barcelona. Why not check there. Maybe they have something in development.
This is from their US website.
http://www.shad.es/en/shad-usa/ (http://www.shad.es/en/shad-usa/)

PRODUCTS

NADSL currently equips the following seats and top cases for the principal European motorcycle production centres, exporting seats for some brands such as Triumph, to their production centres in Indonesia. The design, development, production and storage of our entire OEM equipment is carried out at our central production facilities in Mollet del Vallés, located on the outskirts of Barcelona.