Kawasaki Concours Forum

The C10, aka Kawasaki Concours - The Original => The Bike - C10 => Topic started by: Tele130 on October 20, 2011, 06:56:55 AM

Title: Replacing banjo bolts on the clutch line.
Post by: Tele130 on October 20, 2011, 06:56:55 AM

I have a S/S braided clutch line to install this winter.  I need to order a pair of banjo bolts.

Does anyone know the "PITCH" of these?......1.00 or 1.25?

Thanks. :thumbs:

Title: Re: Replacing banjo bolts on the clutch line.
Post by: gtr1000 on October 20, 2011, 08:49:29 AM

M10 x 1.25  ;)

FWIW, this is also the same thread as the blanked off mirror mounts on the bars, just in case you want to add farkles up there.

Title: Re: Replacing banjo bolts on the clutch line.
Post by: Tele130 on October 21, 2011, 07:38:30 AM

Quote from: gtr1000 on October 20, 2011, 08:49:29 AM

M10 x 1.25  ;)

FWIW, this is also the same thread as the blanked off mirror mounts on the bars, just in case you want to add farkles up there.

Thanks Paul. :thumbs:

Title: Re: Replacing banjo bolts on the clutch line.
Post by: snarf on October 21, 2011, 08:52:13 AM

Hey Doug, do you 'need' to replace the banjo bolts or just 'want' to?  Generally all that is needed is new crush washers. I picked mine up from a local auto parts store.