Kawasaki Concours Forum

The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: Burbs on July 24, 2011, 09:43:17 AM

Title: Handlebar Diameter Question For Cruise Control
Post by: Burbs on July 24, 2011, 09:43:17 AM
I am going to be ordering this little cruise control setup from Aerostich http://www.aerostich.com/a-to-b-utilities/rider-comfort/cruise-controls/universal-vista-cruise-control.html (http://www.aerostich.com/a-to-b-utilities/rider-comfort/cruise-controls/universal-vista-cruise-control.html) It's giving me a choice for a 7/8 or 1" diameter bar and I'm pretty sure it's 7/8 but wanted to double check with you guys here. I believe the area on the handlebar to mount different farkles is 7/8" no?

Thanks,

-Chris

**Fixed the link**
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: philipintexas on July 24, 2011, 01:06:14 PM
You're correct, they are 7/8".
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: maxtog on July 24, 2011, 03:45:58 PM
Quote from: Burbs on July 24, 2011, 09:43:17 AM
I am going to be ordering this little cruise control setup from Aerostich http://www.aerostich.com/a-to-b-utilities/rider-comfort/cruise-controls/universal-vista-cruise-control.html. (http://www.aerostich.com/a-to-b-utilities/rider-comfort/cruise-controls/universal-vista-cruise-control.html.) It's giving me a choice for a 7/8 or 1" diameter bar and I'm pretty sure it's 7/8 but wanted to double check with you guys here. I believe the area on the handlebar to mount different farkles is 7/8" no?

Not to be overly picky, but that is not a "cruise control" and shouldn't be called such... it is a throttle lock.  Also, your link is broken.

I bought a Vista and tried to install it and it doesn't fit AT ALL on a 2010/2011- it is much too wide.  I looked at the pictures from other people doing it and don't see how it is possible.  So it sits in a box.

http://www.zggtr.org/index.php?topic=352 (http://www.zggtr.org/index.php?topic=352)
http://www.zggtr.org/index.php?topic=340 (http://www.zggtr.org/index.php?topic=340)
http://www.zggtr.org/index.php?topic=1098 (http://www.zggtr.org/index.php?topic=1098)
http://www.zggtr.org/index.php?topic=1811 (http://www.zggtr.org/index.php?topic=1811)
http://www.zggtr.org/index.php?topic=1561 (http://www.zggtr.org/index.php?topic=1561)
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: philipintexas on July 25, 2011, 09:20:49 AM
Here are a few photos of my VISTA CRUISE installation. I cut off the tab that is formed at a right angle on the bottom. I drilled & tapped holes for two #2 screws, and attached it to the throttle cable housing. I used a disk sander and slightly reduced the material from the inside end of the grip to allow more room.  The brass knob is one I made.
(http://i214.photobucket.com/albums/cc213/philipintexas/Vista%20Cruise/VistaCruise.jpg)
(http://i214.photobucket.com/albums/cc213/philipintexas/Vista%20Cruise/VistaCruise1.jpg)
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: maxtog on July 25, 2011, 04:29:34 PM
Quote from: philipintexas on July 25, 2011, 09:20:49 AM
Here are a few photos of my VISTA CRUISE installation. I cut off the tab that is formed at a right angle on the bottom. I drilled & tapped holes for two #2 screws, and attached it to the throttle cable housing. I used a disk sander and slightly reduced the material from the inside end of the grip to allow more room.  The brass knob is one I made.

And for an older 2008/2009 (which I believe is pictured), that might work.  But I did not see how it was possible on the 2010/2011.  The thickness of the nylon simply does not fit in the gap... it is not even remotely close... even discounting the complexity of dealing with the heated grip flange/wiring.  I am not sure what you mean by "reduced the material from the inside end of the grip" but if that would mean bringing a sander near to and attempting to alter my brand new 2011, it simply is not an option.

I hate that I gave up, because I really need and want a throttle lock and I am not/was not pleased with the design or price of the bar-weight-end types.  Alas, I might have to break down and get one.  Damnit, Kawasaki, why didn't you offer a REAL cruise control option??!??!!!

:(
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: Stavee on July 25, 2011, 06:09:50 PM
One  size fits all!  Caterpillar  8M4991

(http://i261.photobucket.com/albums/ii61/stavee/CIMG0044-1-1.jpg)
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: Burbs on July 25, 2011, 07:53:35 PM
Quote from: philipintexas on July 25, 2011, 09:20:49 AM
Here are a few photos of my VISTA CRUISE installation. I cut off the tab that is formed at a right angle on the bottom. I drilled & tapped holes for two #2 screws, and attached it to the throttle cable housing. I used a disk sander and slightly reduced the material from the inside end of the grip to allow more room.  The brass knob is one I made.
(http://i214.photobucket.com/albums/cc213/philipintexas/Vista%20Cruise/VistaCruise.jpg)
(http://i214.photobucket.com/albums/cc213/philipintexas/Vista%20Cruise/VistaCruise1.jpg)

WOW! That's a lot more involved than I would have liked.
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: Burbs on July 25, 2011, 08:36:44 PM
I just ordered the Go Cruise and think that will help out. I'm not looking to spend a fortune, I'm just looking for something to take the edge off every so often.

-Chris
Title: Re: Handlebar Diameter Question For Cruise Control
Post by: mkorn on July 26, 2011, 11:16:08 AM
Quote from: Burbs on July 25, 2011, 08:36:44 PM
I just ordered the Go Cruise and think that will help out. I'm not looking to spend a fortune, I'm just looking for something to take the edge off every so often.

-Chris

The Go-Cruise works great for that ... i use mine regularly on long trips.
its nice to be able to take your right hand off the bars to adjsut things or just to relax for a few minutes.