Kawasaki Concours Forum
The C-14, aka Kawasaki Concours-14, the new one :) => The Bike - C14/GTR 1400 => Topic started by: kzz1king on January 02, 2017, 09:16:36 PM
-
This isnt the correct value for the median exhaust is it? Shouldnt it be .2169 mm?
-
This isnt the correct value for the median exhaust is it? Shouldnt it be .2169 mm?
Is this part of the http://www.zggtr.org/index.php?topic=22047.0 (http://www.zggtr.org/index.php?topic=22047.0) thread?
-
I've never done the valve adjust myself, but it's been noted in the past that there is a service manual error and that the manual should say:
[c] Specified Valve Clearance (Mean Value=0.215mm
{Exhaust} 0.145mm {Inlet})
I'm just reporting what I've read in the past, but I haven't done any of the math so is .215 close enough to .2169 ???? to say yes to your question?
I don't know. :-\
I've read that there is another error on page 2-25 (?) where #1 and #4 cylinders are switched in the bold Text but not the diagram. That is the diagram is correct
but the bold text to it's left is wrong: #1 should be #4 and vice versa?
-
Thanks. That is a huge mistake they made.
-
I've never done the valve adjust myself, but it's been noted in the past that there is a service manual error and that the manual should say:
[c] Specified Valve Clearance (Mean Value=0.215mm
{Exhaust} 0.145mm {Inlet})
I'm just reporting what I've read in the past, but I haven't done any of the math so is .215 close enough to .2169 ???? to say yes to your question?
I don't know. :-\
The previous page says Ex 0.19-0.24mm In 0.12-0.17. The means of the two are 0.215 and 0.145... so there is an error on page 2-27 where is says 0.125 and 0.145. It appears to be a dyslexia (transposition) error. This is in my 2010-2012 factory manual, 3rd edition Apr 16, 2011.
-
Mine is a 2010 manual. Seems they had time to fix it.
The previous page says Ex 0.19-0.24mm In 0.12-0.17. The means of the two are 0.215 and 0.145... so there is an error on page 2-27 where is says 0.125 and 0.145. It appears to be a dyslexia (transposition) error. This is in my 201-2012 factory manual, 3rd edition Apr 16, 2011.