Kawasaki Concours Forum
The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: PlaynInPeoria on July 06, 2016, 11:15:45 AM
-
Went on a 4900 mile trip from Peoria IL to the west and back. In Afton WY, a friend on a Multistrada took a rock to several location on his radiator and developed a couple leaks. Believe it or not, StopLeak fixed it and he finished the trip and rode all the way home to Greenville SC. Their radiators are much more exposed than a C14 but it's still a big deal if you puncture a radiator, we thought it might end his trip.
A guard will be ordered post haste! I want one on before we go to Maine next month.
I lost an HID headlight on the road and was concerned about my Pirelli Angel GTs that were new when we started but they held up well and probably have a max of 1000 miles left. My other friend with a Multistrada (yes, there were 2, 2 C14s and a BMW RT1200 also) replaced a chain on the road, then that chain died and he got another one, then got a flat he could repair and had to put the bike in a rented truck the last 500 miles. And no, that wasn't cheap.
-
Get a front fender extender as well...
-
+1 to extender. I just pulled my plastics for a project and noticed all kinds of tar and road grime built up on the front pop rivets that join the left and right fairings together. And a little bit under the extender, but nowhere else on the bike. Also running a Cox guard. Some big horseflies piled up in there right now.
-
I ordered a radiator guard and a fender extender. I am in no way a mechanic but I didnt like the way the radiator guard installed. One bolt, zip ties and foam rubber. i just dont think it a solid install. there is a lot of heat down there! I kept the extender, going to go just that.
-
I don't think I've heard of one falling off. Mine certainly hasn't.
-
Yeah; I would go back with the rad guard and not sweat the installation. That's just how it installs and it's worth it. I don't even do the zip ties at the top. At least with the Cox, once you bolt it in, the edges of the guard press in pretty tight to the edges of the rad. It's not going anywhere.
-
Yup, my PCA one has two upside down U-clips at the top and the bolt at the bottom. Pretty secure.
-
Took your advice and have ordered the PCA radiator guard. Looks pretty well built. Thanks.
-
:chugbeer:
I had to "re-curve" it a little tiny bit, but just a hair. Six months, still in place.
-
Just ordered a projekt D guard and fenda extenda.
-
Just ordered a projekt D guard and fenda extenda.
Those were on my ever-long to-do list.
-
Those were on my ever-long to-do list.
Do your brake/clutch fluid flush first. ;)
-
Do your brake/clutch fluid flush first. ;)
UG!
Yes, I promise that will be first. It is actually top on the list.
-
If you want to do it yourself (when it's warmer), I can ride down there and assist with it.
-
If you want to do it yourself (when it's warmer), I can ride down there and assist with it.
That is a very kind offer! I have a slew of things on my list, including valve check/adjust, cleaning the rotors & bobbins, some headlight wiring fixes, swapping the defective right front turn signal LED bulb, another fluids change, coolant change, lock cleaning, header bolts check (and other bolts), and it is all piled up waiting for my mechanic friend to finish settling into his new house and get his garage up and running. I was kinda waiting to do it all at once with him. The time is really ticking on my tires at this point, but I think that will have to be a dealer thing, anyway, and done sooner.
-
I've heard of 1 guard that is really hard to install.
Whish is it, and which the easiest, and which the best?
Yea, I know there will be lots of opinions...
Ride safe, Ted
-
The Cox guard was a bit of a pain to install but since it was only one I've installed I have no comparisons. It does work as advertised.
-
Down in the Texas Hill Country, I've seen a rock thrown up that broke the lower fairing on an 08 Connie. We had to pull over and zip tie and tape his bike back together.
-
Down in the Texas Hill Country, I've seen a rock thrown up that broke the lower fairing on an 08 Connie. We had to pull over and zip tie and tape his bike back together.
Was is that little part where the two meet/connect at the bottom right behind the front wheel?
-
I've heard of 1 guard that is really hard to install.
Whish is it, and which the easiest, and which the best?
Yea, I know there will be lots of opinions...
Ride safe, Ted
radiator guards are not like oil, a user usually doesn't have the opportunity to test a few through his life, so it's tough to find somebody who ever compared 2 guards. Furthermore, most bike owners won't ever mount one, and most won't ever have an issue. It's one of those things you wish you had when something happened, which is not often. That said, I have mine from a UK company, was a bliss to install and never had a hole through the radiator. But then again, so what? Maybe I never met a rock, maybe there were trillions and none managed to get through the thing. I haven't seen any trace of big impacts on it when I washed my bike 2 years ago (don't tell Jim).
My advice: mount one, it's going to be a one time job and expense, and forget about it. It will protect your radiator better than no guard, no doubt.
-
Good point Martin. Thank you..
I will get busy and get one and get-er-done..
Ride safe, Merry Christmas, Ted
-
A radiator guard should be a must fit in IMHO ....I fitted one of these :)
http://www.beowulfuk.com/proddetail.asp?prod=K024 (http://www.beowulfuk.com/proddetail.asp?prod=K024)
-
ooooooo.....shiney :)
-
I'm a little off topic here but since fender extenders seem to always show up in a radiator guard thread, I wanted to remind all that Blue One (http://www.zggtr.org/index.php?action=profile;u=488) also makes these (http://www.zggtr.org/index.php?topic=128.0) up in Canada for our bikes both front and rear. Having purchased both front and rear extenders I can vouch for his products and past business practices as far as delivery of products. It has been some time since I purchased from him however. There will be some delay, as going through the Canadian/U.S. postal interface seems to take at least a week on a quick order and can take longer as well, so I do recommend ordering in winter when your bike may not be going anywhere anyway. I bring this up now because at one time (when I ordered mine) his front fender extender was the only one on the market that was extra long and in my opinion kept the radiator cleaner. Even though mine doesn't look all that clean in these photos, but then these photos don't show all the stuff (fresh oil and asphalt etc) that I've driven through this last year. It's been several years, so I don't know if that is still the case (his front extender being longer). Mine is approx 8.5 inches long (easy boys) from tip of fender to tip of extender. Is a slightly longer extender important? (EZB)..I'm not sure, but now you know/have been reminded that there is a choice. Just PM him either on this forum or the other one. Mine (front only) is just glued on with plumbing ABS cement and has over 60k miles on it.
(https://photos.smugmug.com/photos/i-rRLksmS/0/L/i-rRLksmS-L.jpg) (https://photos.smugmug.com/photos/i-rRLksmS/0/O/i-rRLksmS.jpg)
(https://photos.smugmug.com/photos/i-dGWS5mZ/0/L/i-dGWS5mZ-L.jpg) (https://photos.smugmug.com/photos/i-dGWS5mZ/0/O/i-dGWS5mZ.jpg)
-
Was is that little part where the two meet/connect at the bottom right behind the front wheel?
Yes Max, exactly.
-
I have one from another manufacturer sitting on the shelf in the garage. After I got it as a gift I looked where it came and remembered my other one on the 08 and contacted Blue for his to put on my new bike. I think I like the fender extensions. On my Meanstreak I have a rad guard . Not sure if I need to add one in addition to the fender extender on Connie
-
I think I like the fender extensions. On my Meanstreak I have a rad guard . Not sure if I need to add one in addition to the fender extender on Connie
I suppose it is possible that a rock could be kicked up from ANOTHER vehicle, something that a radiator guard would help defray and that a fender extender would not. Seems like a very low probability to me, however.
-
Not sure if I need to add one in addition to the fender extender on Connie
I suppose it is possible that a rock could be kicked up from ANOTHER vehicle, something that a radiator guard would help defray and that a fender extender would not. Seems like a very low probability to me, however.
It's not as though a punctured radiator hundreds of miles from any real support is the same as a punctured tire in the same situation. Therefore, even if it seems like wearing both suspenders and a belt, I recommend both. Get the extender first just because it's a fast easy install but get around to the radiator guard unless you are never far from home or a friend with a trailer. If you can't under any conditions justify spending money on both, then get the radiator guard.
Just my opinion and worth what you paid for it.
-
IMHO the best guard is from a company out of Australia. Here is the link: http://www.radguard.com.au/ (http://www.radguard.com.au/)