Kawasaki Concours Forum

The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: sanmo on April 19, 2015, 07:35:08 AM

Title: M10x1.5 RAM ball mount. Does it exist?
Post by: sanmo on April 19, 2015, 07:35:08 AM

My used C14 came with 1.75" risers installed. Unknown make. It has an offset accessory mount bolt hole built in, which I would like to use for GPS, etc. Problem is that it appears to be M10, 1.5 pitch while my searches have yielded only M10 with 1.25 pitch. Is there an obvious solution that I'm missing?

Title: Re: M10x1.5 RAM ball mount. Does it exist?
Post by: The Pope on April 19, 2015, 07:44:06 AM

Are you sure that it's an M10X1.5? It might be an 3/8-16.

Title: Re: M10x1.5 RAM ball mount. Does it exist?
Post by: gPink on April 19, 2015, 07:44:21 AM

The only risers w/mounts that I'm aware of is Helibars and KB's from Murphs. Both still available.

Title: Re: M10x1.5 RAM ball mount. Does it exist?
Post by: sanmo on April 19, 2015, 10:55:44 AM

Thanks Pope & gPink. I hadn't thought of looking at the Helibar risers, but that is exactly what I have. They are indicating 3/8" x 16 thread pitch. Problem solved. :finger_fing11:

Title: Re: M10x1.5 RAM ball mount. Does it exist?
Post by: mikeb2411 on April 21, 2015, 01:30:23 PM

Quote from: gPink on April 19, 2015, 07:44:21 AM

The only risers w/mounts that I'm aware of is Helibars and KB's from Murphs. Both still available.

Or, the 2" risers from AST and then drill and tap your own holes for the RAM mount like I did  :thumbs:

Title: Re: M10x1.5 RAM ball mount. Does it exist?
Post by: sanmo on April 21, 2015, 03:09:30 PM

 :popcorn: :popcorn: :popcorn: