Kawasaki Concours Forum

The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: brant bandit on February 23, 2015, 08:35:34 PM

Title: ram balls bolted on lever screws??
Post by: brant bandit on February 23, 2015, 08:35:34 PM

http://www.ebay.com/itm/RAM-Motorcycle-Handlebar-Clamp-Base-w-M8-Screws/171676561879?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29171%26meid%3D23db993ce717426ca43f17da16794213%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D390913594078&rt=nc (http://www.ebay.com/itm/RAM-Motorcycle-Handlebar-Clamp-Base-w-M8-Screws/171676561879?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29171%26meid%3D23db993ce717426ca43f17da16794213%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D390913594078&rt=nc)

The bolts that hold the levers on the handlebar....are they M8 bolts?

I found this one from AST but with shipping to Canada and exchange it's a bit expensive. If the ones from ebay can do the same thing its an easy decision.
http://www.advancedsporttouring.com/product_p/c14-07.htm (http://www.advancedsporttouring.com/product_p/c14-07.htm)

Title: Re: ram balls bolted on lever screws??
Post by: just gone on February 24, 2015, 12:16:53 AM

Quote from: brant bandit on February 23, 2015, 08:35:34 PM

The bolts that hold the levers on the handlebar....are they M8 bolts?

M6

92153-1518  BOLT,SOCKET,6X22

Maybe this--> http://www.amazon.com/Motorcycle-Handlebar-Clamp-Fitting-25mm/dp/B00GGKXDFW (http://www.amazon.com/Motorcycle-Handlebar-Clamp-Fitting-25mm/dp/B00GGKXDFW)
...doubled the price, I'm not sure about shipping to Canada.

Title: Re: ram balls bolted on lever screws??
Post by: brant bandit on February 25, 2015, 10:09:28 AM

Those are cool. RAM has the same thing:

http://www.rammount.com/part/RAM-B-367U (http://www.rammount.com/part/RAM-B-367U)

Would these fit?

Title: Re: ram balls bolted on lever screws??
Post by: sherob on February 25, 2015, 02:44:13 PM

Quote from: brant bandit on February 25, 2015, 10:09:28 AM

Those are cool. RAM has the same thing:

http://www.rammount.com/part/RAM-B-367U (http://www.rammount.com/part/RAM-B-367U)

Would these fit?

Included with Purchase:
(1 QTY) 1" Rubber ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)

Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

Note:
The "U" in the part number reflects product packaged in poly bag.

Title: Re: ram balls bolted on lever screws??
Post by: Cruise Missile on February 28, 2015, 11:20:37 PM

I purchased a ram mount that bolts to the lever mounts in Calgary.. GPS city. I think it was around $16.00 Cdn.
Will post pictures if your interested.

Title: Re: ram balls bolted on lever screws??
Post by: brant bandit on March 03, 2015, 11:10:12 AM

These are the ones I ordered:

http://radioworld.ca/advanced_search_result.php?search_in_description=1&keywords=RAM-B-309-1U&x=0&y=0 (http://radioworld.ca/advanced_search_result.php?search_in_description=1&keywords=RAM-B-309-1U&x=0&y=0)

$11 each plus tax and shipping