Kawasaki Concours Forum
The C10, aka Kawasaki Concours - The Original => Accessories and Modifications - C10 => Topic started by: dansidecar on August 28, 2014, 11:56:03 AM
-
Ehh I tried the bicycle waterbottle thing but this has a factory install from ebay diamond plate cupholder $14 out the door buy the way I did plastic dip the harley mufflers with no probs
8)
-
Pics
-
Nice idea. simple yet functional. About the mufflers, does the plastidip hold up to the heat??
-
Tough to reach while you're riding ;D Maybe a really long straw?
-
Ehh I took it off because the smell was pretty bad. Used high heat krylon for barbecue black . Doing fine now with no smell
-
I had 4 on the bike at one point, yes 4. Don't ask.
This is a plain $.99 cup holder from any gas station, fits over the clutch reservoir, just put in two holes and zip tie it on. Have used this setup on mutliple bikes without an issue.
(https://lh3.googleusercontent.com/-bPvpqXGas_o/SrLC7R6ygII/AAAAAAAAJJo/7Pf_6TJQpqY/w815-h611-no/Outlet.jpg)
On the left is a standard handlebar mounted bicycle bottle cage. These are just a few bucks shipped on eBay, in the center is a handlebar mounted cup holder, the difference between a cup holder and a bottle cage is that the cup holder is tapered to accept cups. Must have for coffee. On the right I had an L bracket on the handlebar mounted mirror stem which had a Bell expandocage for large bottles. Note it's not pictured.
(https://lh6.googleusercontent.com/-cyK5hzE2aF0/SrLCzYBZUCI/AAAAAAAADQQ/fqqbZAMlRUk/w815-h611-no/Cupholder1.jpg)(https://lh4.googleusercontent.com/-rDEg-kn7350/SrLCzqseLlI/AAAAAAAAJAk/mzNs0oAC_EU/w815-h611-no/Cupholder2.jpg)(https://lh5.googleusercontent.com/-G_DsZlptnlI/SrLCzhzfmbI/AAAAAAAAJAo/PnwtxoGK3PU/w815-h611-no/Cupholder3.jpg)
-
^^ do you wear a lid and drink out of that cup?
-
I have yes, a flip up lid. But 90% of the time it's to pick up and not necessarily to drink while riding. I'll take a sip or two at a red light though.
-
Ehh I changed the location because the seat lock was there so I clamped it below the clutch res. way better and trick bent the stalk about 30 degrees by the way u got a lot of plumbing up front just like a nasa rocket ;D