Kawasaki Concours Forum
The C-14, aka Kawasaki Concours-14, the new one :) => Accessories and modifications - C14/GTR 1400 => Topic started by: Bryn on May 03, 2013, 06:23:19 AM
-
Can anyone suggest how I can mount a second RAM ball on the C14?
I have a Zumo 660 in the normal place between the handlebars using a threaded bar through the top cap... works great...
Now I've obtained a Pure Highway DAB radio with Otterbox, which is set up with a RAM ball.... so its a case of how I can mount it ?
Thanks 8)
-
Try this
http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045051048057045050/Default.aspx (http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045051048057045050/Default.aspx)
-
Try this
http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045051048057045050/Default.aspx (http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045051048057045050/Default.aspx)
Thanks for that... the single one would do the job nicely.... My 660 is already on a RAM ball so only need 1 8)
-
Try this
http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045051048057045050/Default.aspx (http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045051048057045050/Default.aspx)
This is what I use for my radar detector and IPhone. Great placement IMO.
-
Single one will do the job fine.... got my feelers out already ;D
-
I've got one on each side....for balance. Can't have one on just one side cause I'd always be compensating for it.