Kawasaki Concours Forum
Marketplace => For Sale => Topic started by: COGnosticat0r on October 06, 2012, 03:50:56 PM
-
I have these few items for sale off my 2009 C14, but I think they will fit any year.
Speigler LSL Conversion Kit New it was $520 but I am offering a basterized setup. It came with a SS brake front line, I left that on the bike. The handlebars I am going to put on the Triumph ST3 and they will fit, so I am offering the CNC mounts and all you will need to buy is the handlebars. I am asking $215 for the mounts shipped. In the following pictures you can see the mounts and here is a link to Spiegler site http://www.spieglerusa.com/handlebar-conversion-kit-4315.htm (http://www.spieglerusa.com/handlebar-conversion-kit-4315.htm) SOLD PENDING FUNDS
(http://www.pbase.com/cognosticator/image/134708037/medium.jpg)
Factory Shop Manual $40 Shipped (Some grease on some pages ;D)
I take paypal, you don't need to "gift" it to me, I will eat the 3%
email me at cognosticator@yahoo.com or PM me here
-
PM sent in the other site.
-
PM sent in the other site.
Got it
-
i will take the russell if it becomes available
ken
-
i will take the russell if it becomes available
ken
I am awaiting payment at this momen
-
PM sent on the rack
-
PM sent on the rack
Josh, the rack is yours, I sent you a PM Thanks
-
A couple of items left
-
Jerry, is the LSL clamp still up? What is the rise height from the top of the triple clamp to the center of the bar hole? Are the risers separate from the adapter plate and replaceable?
-
Jerry, is the LSL clamp still up? What is the rise height from the top of the triple clamp to the center of the bar hole? Are the risers separate from the adapter plate and replaceable?
Still for sale here are some pics of what is being offered. When the handlebar clamp is on top of the riser it is 4 3/4" to the center of where the handlebars are and from the front to back it is 3 1/4" and it will also include the top clamp that holds the bars on. The bars that are on my bike are $115 from Spiegler
Here is my link to a lot of pictures of them on my bike, scroll down until you see the pictures:
http://www.pbase.com/cognosticator/2009_c14&page=all (http://www.pbase.com/cognosticator/2009_c14&page=all)
-
Thanks. Under consideration. Does it use the stock bolts?
-
Thanks. Under consideration. Does it use the stock bolts?
It had it's own SS bolts, I could not find all the stock bolts so I used some of the LSL bolts to put the stock ones. My plan is to supply all new SS socket head cap screws if someone buys this.
I will let this go for $215 shipped in CONUS
-
you're really tempting me
-
you're really tempting me
;D $200 shipped and you supply your own bolts, I will include the few I have so you will know what sizes to get
-
I ran into problems with hardware store SS socket head cap screws , the heads are to big to fit into the holes of the LSL plates .
-
I ran into problems with hardware store SS socket head cap screws , the heads are to big to fit into the holes of the LSL plates .
I will check my source tomorrow to see if they fit
-
I am amazed they haven't sold yet. I LOVE my LSLs and have a hard time even thinking about putting the stockers back on. Someone needs to jump all over this. Heck at that price I bet a person could contact LSL and get a set of bolts. I'd be all over the shop manual but I hear Kirby is upset I called him a mouse :-X
-
I drill the holes a little bigger because I had a machine shop make risers to match the LSL mount .
-
If I had the $$$, I'd be all over this! :-\
-
PM sent